Avionics Onboarding 2020 - Revision history

Hagop at 18:24, 16 December 2020

2020-12-16T18:24:26Z

← Older revision		Revision as of 18:24, 16 December 2020
Line 55:		Line 55:

	== Module 1: Intro ==		== Module 1: Intro ==
	Watch the following video. [https://~~drive~~.~~google~~.com/~~file/d/1hGY2tyMmSVdJ1w7BurlsysGHCRrfPqR0/view~~?~~usp~~=~~sharing~~]		Watch the following video. [https://www.youtube.com/watch?v=xhKKqDbDuHE&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=3]

	== Module 2: Parts Overview ==		== Module 2: Parts Overview ==
	Watch the following video. [https://~~drive~~.~~google~~.com/~~file/d/1S0m21~~-~~P2e2WpDPKfj6AkhTLxnZ3XeGqR/view?usp~~=~~sharing~~]		Watch the following video. [https://www.youtube.com/watch?v=XU-bfNY4TT0&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=4]

	== Module 3: Setting up the Feather ==		== Module 3: Setting up the Feather ==
Line 64:		Line 64:

	== Module 4: Serial demo Module ==		== Module 4: Serial demo Module ==
	Watch the following video. [https://~~drive~~.~~google~~.com/~~file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view~~?~~usp~~=~~sharing~~]		Watch the following video. [https://www.youtube.com/watch?v=l4EaoHGZOEQ&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=2]

	== Module 5: LED Demo Module ==		== Module 5: LED Demo Module ==
	Watch the following video. [https://~~drive~~.~~google~~.com/~~file/d/1DqIgBM2JGQs4Y376d1cQt13SqGL_IVo4/view~~?~~usp~~=~~sharing~~]		Watch the following video. [https://www.youtube.com/watch?v=1mK70pcoVTY&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=5]

	== Module 6: Anemometer Demo Module ==		== Module 6: Anemometer Demo Module ==
	Watch the following video. [https://~~drive~~.~~google~~.com/~~file/d/17b3IW1_BTZ2MmWhfcd9ntvp7tA2-CLVy/view~~?~~usp~~=~~sharing~~]		Watch the following video. [https://www.youtube.com/watch?v=nFOJzZa_s8A&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=1]

Hagop at 01:09, 12 December 2020

2020-12-12T01:09:37Z

← Older revision		Revision as of 01:09, 12 December 2020
Line 60:		Line 60:
	Watch the following video. [https://drive.google.com/file/d/1S0m21-P2e2WpDPKfj6AkhTLxnZ3XeGqR/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/1S0m21-P2e2WpDPKfj6AkhTLxnZ3XeGqR/view?usp=sharing]

	== Setting up the Feather ==		== Module 3: Setting up the Feather ==
	Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]		Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]

	== Module 3: Serial demo Module ==		== Module 4: Serial demo Module ==
	Watch the following video. [https://drive.google.com/file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view?usp=sharing]

	== Module 4: LED Demo Module ==		== Module 5: LED Demo Module ==
	Watch the following video. [https://drive.google.com/file/d/1DqIgBM2JGQs4Y376d1cQt13SqGL_IVo4/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/1DqIgBM2JGQs4Y376d1cQt13SqGL_IVo4/view?usp=sharing]

	== Module 5: Anemometer Demo Module ==		== Module 6: Anemometer Demo Module ==
	Watch the following video. [https://drive.google.com/file/d/17b3IW1_BTZ2MmWhfcd9ntvp7tA2-CLVy/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/17b3IW1_BTZ2MmWhfcd9ntvp7tA2-CLVy/view?usp=sharing]

Hagop at 01:07, 12 December 2020

2020-12-12T01:07:38Z

← Older revision		Revision as of 01:07, 12 December 2020
Line 58:		Line 58:

	== Module 2: Parts Overview ==		== Module 2: Parts Overview ==
	Watch the following video. [https://drive.google.com/file/d/~~1cZH21qZDNko9VZfaTsGhMvSKzUcryBmY~~/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/1S0m21-P2e2WpDPKfj6AkhTLxnZ3XeGqR/view?usp=sharing]

	== ~~Module 3:~~ Setting up the Feather ==		== Setting up the Feather ==
	Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]		Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]

	== Serial demo Module ==		== Module 3: Serial demo Module ==
	Watch the following video. [https://drive.google.com/file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view?usp=sharing]

	== LED Demo Module ==		== Module 4: LED Demo Module ==
	Watch the following video. [https://drive.google.com/file/d/~~1jcAhQDGqYDc8QFYw95TlDVoe20ed6MhN~~/view?usp=sharing]		Watch the following video. [https://drive.google.com/file/d/1DqIgBM2JGQs4Y376d1cQt13SqGL_IVo4/view?usp=sharing]

			== Module 5: Anemometer Demo Module ==
			Watch the following video. [https://drive.google.com/file/d/17b3IW1_BTZ2MmWhfcd9ntvp7tA2-CLVy/view?usp=sharing]

Hagop: /* Module 0: Safety */

2020-12-11T03:40:38Z

Module 0: Safety

← Older revision		Revision as of 03:40, 11 December 2020
Line 52:		Line 52:
	* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.		* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.
	* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.		* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
	* '''Always double check ~~your connections~~ before connecting the Feather to a micro USB cable or to the Feather battery. '''		* '''Always double check how you've wired everything on the breadboard before connecting the Feather to a micro USB cable or to the Feather battery. '''

	== Module 1: Intro ==		== Module 1: Intro ==

Hagop: /* Module 0: Safety */

2020-12-11T03:40:19Z

Module 0: Safety

← Older revision		Revision as of 03:40, 11 December 2020
Line 51:		Line 51:
	* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.		* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
	* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.		* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.
	* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.		* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
			* '''Always double check your connections before connecting the Feather to a micro USB cable or to the Feather battery. '''

	== Module 1: Intro ==		== Module 1: Intro ==

Hagop at 03:39, 11 December 2020

2020-12-11T03:39:22Z

← Older revision		Revision as of 03:39, 11 December 2020
Line 50:		Line 50:
	* We're here to help you! Ask us if you have any questions.		* We're here to help you! Ask us if you have any questions.
	* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.		* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
	* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. ~~Since~~ we~~'re working remotely this quarter, it'll~~ be ~~difficult~~ to ~~send replacement parts~~.		* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.
	* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.		* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.

Hagop at 03:38, 11 December 2020

2020-12-11T03:38:17Z

← Older revision		Revision as of 03:38, 11 December 2020
Line 46:		Line 46:

	Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]		Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]

			== Module 0: Safety ==
			* We're here to help you! Ask us if you have any questions.
			* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
			* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. Since we're working remotely this quarter, it'll be difficult to send replacement parts.
			* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.

	== Module 1: Intro ==		== Module 1: Intro ==

Hagop at 03:31, 11 December 2020

2020-12-11T03:31:09Z

← Older revision		Revision as of 03:31, 11 December 2020
Line 46:		Line 46:

	Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]		Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]


	== Module 1: Intro ==		== Module 1: Intro ==

Hagop at 03:30, 11 December 2020

2020-12-11T03:30:49Z

← Older revision		Revision as of 03:30, 11 December 2020
Line 10:		Line 10:
	Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be a member of SSI. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]		Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be a member of SSI. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]

	If you've finished a module or are running into issues, please fill out the following form. [https://tinyurl.com/ssi-av-onboarding-2020]		'''If you've finished a module or are running into issues, please fill out the following form. [https://tinyurl.com/ssi-av-onboarding-2020]'''


	===Lab 64===		===Lab 64===

Hagop at 03:30, 11 December 2020

2020-12-11T03:30:30Z

← Older revision		Revision as of 03:30, 11 December 2020
Line 9:		Line 9:

	Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be a member of SSI. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]		Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be a member of SSI. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]
	~~Our first meeting will be~~ '~~''Wednesday~~, ~~September 22 at 8 PM'''~~.
			If you've finished a module or are running into issues, please fill out the following form. [https://tinyurl.com/ssi-av-onboarding-2020]


	===Lab 64===		===Lab 64===