Metric Fasteners - Revision history

Lskaling: New metric fasteners added

2022-04-30T04:58:15Z

New metric fasteners added

@@ Line 198: / Line 198: @@
 == Re-order Links ==
 Note: If a part is out of stock or requiring shipping from a different location, the "corrosion resistance" equivalent can be substituted, however slightly more expensive.
 {| class="wikitable"
 |+M3
@@ Line 203: / Line 229: @@
 !McMaster SKU
 !Link
 |-
 |M3 Socket Head, 6mm
@@ Line 305: / Line 335: @@
 |91292A048
 |https://www.mcmaster.com/91292A048
 |-
 |M4 Thread Forming, 8mm

Lskaling: Minor clarifications to screw descriptions

2022-03-08T06:06:13Z

Minor clarifications to screw descriptions

← Older revision		Revision as of 06:06, 8 March 2022
Line 10:		Line 10:

	=== Cap-Head ===		=== Cap-Head ===
	Cap head screws have a cylindrical head. They are most ~~common, and useful in applications which don't require a button head geometry~~. They are easier to model in assemblies and have a stronger ~~head~~ than button-head screws.		Cap head screws have a cylindrical head. They are the go to fastener in most situations. They are easier to model in assemblies and have a stronger socket than button-head screws.

	=== Button-Head ===		=== Button-Head ===
Line 22:		Line 22:

	=== Square Nut ===		=== Square Nut ===
	Square nuts are similar to standard nuts, but with a square exterior. These are mostly used for inserting in 3D printed pieces, as they ~~are~~ stronger and easier to install compared to standard nuts.		Square nuts are similar to standard nuts, but with a square exterior. These are mostly used for inserting in 3D printed pieces, as they create a stronger attachment and easier to install compared to standard nuts.

	=== Nylock Nut ===		=== Nylock Nut ===
Line 28:		Line 28:

	=== Heat-Set Inserts ===		=== Heat-Set Inserts ===
	Heat set inserts are used to create stronger threads in plastic components. They are installed by heating the insert (with a soldering iron), and pressing it into a ~~piece of~~ plastic.		Heat set inserts are used to create stronger threads in plastic components. They are installed by heating the insert (with a soldering iron), and pressing it into a hole in the plastic.

	=== Self-threading screws ===		=== Self-threading screws ===

Lskaling: Added M4 Reorder Table

2022-03-03T20:47:18Z

Added M4 Reorder Table

← Older revision		Revision as of 20:47, 3 March 2022
Line 260:		Line 260:
	\|https://www.mcmaster.com/catalog/94180A331		\|https://www.mcmaster.com/catalog/94180A331
	\|}		\|}
			{\| class="wikitable"
			\|+M4
			!Part
			!McMaster SKU
			!Link
			\|-
			\|M4 Socket Head, 6mm
			\|91292A107
			\|https://www.mcmaster.com/91292A107
			\|-
			\|M4 Socket head, 8mm
			\|91292A108
			\|https://www.mcmaster.com/91292A108
			\|-
			\|M4 Socket Head, 12mm
			\|91292A117
			\|https://www.mcmaster.com/91292A117
			\|-
			\|M4 Socket Head, 16mm
			\|91292A118
			\|https://www.mcmaster.com/91292A118
			\|-
			\|M4 Socket Head, 20mm
			\|91292A121
			\|https://www.mcmaster.com/91292A121
			\|-
			\|M4 Socket Head, 25mm
			\|91292A122
			\|https://www.mcmaster.com/91292A122
			\|-
			\|M4 Socket Head, 30mm
			\|91292A130
			\|https://www.mcmaster.com/91292A130
			\|-
			\|M4 Socket Head, 40mm
			\|91292A132
			\|https://www.mcmaster.com/91292A132
			\|-
			\|M4 Socket Head, 50mm
			\|91292A140
			\|https://www.mcmaster.com/91292A140
			\|-
			\|M4 Socket Head, 60mm
			\|91292A048
			\|https://www.mcmaster.com/91292A048
			\|-
			\|M4 Thread Forming, 8mm
			\|2815-0004-0008*
			\|https://www.servocity.com/zinc-plated-steel-thread-forming-socket-head-screw-m4-x-8mm-length-25-pack/
			\|-
			\|M4 Thread Forming, 12mm
			\|2815-0004-0012*
			\|https://www.servocity.com/zinc-plated-steel-thread-forming-socket-head-screw-m4-x-12mm-length-25-pack/
			\|-
			\|M4 Thread Forming, 16mm
			\|2815-0004-0016*
			\|https://www.servocity.com/zinc-plated-steel-thread-forming-socket-head-screw-m4-x-16mm-length-25-pack/
			\|-
			\|M4 Hex Nut
			\|91828A231
			\|https://www.mcmaster.com/91828A231
			\|-
			\|M4 Nylock Nut
			\|93625A150
			\|https://www.mcmaster.com/93625A150
			\|-
			\|M4 Square Nut
			\|96887A329
			\|https://www.mcmaster.com/96887A329
			\|-
			\|M4 Washer
			\|93475A230
			\|https://www.mcmaster.com/93475A230
			\|-
			\|M4 Oversize Washer
			\|91116A130
			\|https://www.mcmaster.com/91116A130
			\|-
			\|M4 Heat-Set Inserts
			\|94180A351
			\|https://www.mcmaster.com/94180A351
			\|}
			<nowiki>*</nowiki>Unavailable from McMaster, order from Servocity instead

Lskaling: Added more metrics to measure

2022-02-27T04:03:55Z

Added more metrics to measure

← Older revision		Revision as of 04:03, 27 February 2022
Line 159:		Line 159:
	\|5mm		\|5mm
	\|5.5mm		\|5.5mm
			\|-
			\|Cap-Head Clearance
			\|
			\|
	\|}		\|}
	Because laser cutters produce oversized holes, tolerances must be adjusted from the actual values. This can vary with material size, focus, material and laser type.		Because laser cutters produce oversized holes, tolerances must be adjusted from the actual values. This can vary with material size, focus, material and laser type.

Lskaling: Label change

2022-02-27T03:59:32Z

Label change

← Older revision		Revision as of 03:59, 27 February 2022
Line 99:		Line 99:
	\|}		\|}

	=== Hole ===		=== Hole Dimensions ===
	Note that with soft materials such as plastic, standard screws can also be self tapping. These can easily be stripped by over-tightening however.		Note that with soft materials such as plastic, standard screws can also be self tapping. These can easily be stripped by over-tightening however.
	{\| class="wikitable"		{\| class="wikitable"

Lskaling: Initial Commit

2022-02-27T03:58:44Z

Initial Commit

New page

ESIII has an assortment of metric fasteners useful for many projects, and free for any team to use.

== Types of fasteners ==

=== M3 ===
M3 indicates a screw is 3mm diameter, as measured by the outside of the threads. These are common in electronics and good for small prototypes.

=== M4 ===
M4 indicates a screw is 4mm diameter, as measured by the outside of the threads. These are common for hardware such as medium size motors, and good for larger assemblies.

=== Cap-Head ===
Cap head screws have a cylindrical head. They are most common, and useful in applications which don't require a button head geometry. They are easier to model in assemblies and have a stronger head than button-head screws.

=== Button-Head ===
Button head screws have an arced head. They are primarily used in situations which require a small head size, such as constrained space or exterior of a rocket.

=== Counter-Sunk ===
Countersunk screws have a circular head with a chamfer into the screw. These are good for situations which the top of the head must be flush with the surface. A countersink bit can be used to create a slot for the head in the material.

=== Standard Nut ===
Standard are have a hexagonal exterior and threaded inside to hold a screw in place. They must be held in place when screwing, either with your fingers (in applications which doesn't require a tight screw), with a wrench, or with a nut driver.

=== Square Nut ===
Square nuts are similar to standard nuts, but with a square exterior. These are mostly used for inserting in 3D printed pieces, as they are stronger and easier to install compared to standard nuts.

=== Nylock Nut ===
Nylock nuts have a small rubber contact on the head of the nut. This prevents the nut from coming undone with vibrations. These nuts should be installed with the rubber portion facing away from the screw head.

=== Heat-Set Inserts ===
Heat set inserts are used to create stronger threads in plastic components. They are installed by heating the insert (with a soldering iron), and pressing it into a piece of plastic.

=== Self-threading screws ===
Self threading screws are used to fasten materials which don't have any threads. They can simplify components by not requiring nuts or heat-set inserts. They have larger threads compared with standard screws, and as the fastener is drilled, cuts into the material to create a thread and hold the screw in place.

== Dimensions ==

=== Screw Dimensions ===
{| class="wikitable"
|+Screw Dimensions
!Measurement
!M3
!M4
|-
|Thread diameter
|3mm
|4mm
|-
|Cap-Head diameter
|
|
|-
|Cap-Head length
|
|
|-
|Button-Head diameter
|
|
|-
|Button-Head length
|
|
|}

=== Nut Dimensions ===
{| class="wikitable"
|+Nut Dimensions
!Measurement
!Standard M3
!Square M3
!Nylock M3
!Standard M4
!Square M4
!Nylock M4
|-
|Edge to Edge
|
|
|
|
|
|
|-
|Thickness
|
|
|
|
|
|
|-
|Circumscribed Diameter
|
|
|
|
|
|
|}

=== Hole ===
Note that with soft materials such as plastic, standard screws can also be self tapping. These can easily be stripped by over-tightening however.
{| class="wikitable"
|+Hole sizes
!Measurement
!M3
!Self-Tapping M3
!M4
!Self-Tapping M4
|-
|Clearance Hole
|3mm (1/8 in)
|3mm (1/8 in)
|4mm (11/64 in)
|4mm (11/64 in)
|-
|Tapping Hole
|2.5mm (3/32 in)
|2.2mm (3/32 in)
|3.5mm (9/64 in)
|3.2 (1/8 in)
|-
|Heat-Set Inserts
|5mm (3/16 in)
| -
|5.5mm (7/32 in)
| -
|}

== Common Fabrication Dimensions ==
Because 3D printers produce undersized holes, tolerances must be adjusted from the actual values. These numbers are optimized for Prusa printers.
{| class="wikitable"
|+3D printing dimensions
!
!M3
!M4
|-
|Clearance Hole
|3.2mm
|4.2mm
|-
|Tapping Hole (standard screw)
|2.6mm
|3.6mm
|-
|Tapping Hole (self-threading screw)
|
|
|-
|Hex Nut Width
|
|
|-
|Square Nut Width
|
|
|-
|Heat-Set Inserts
|5mm
|5.5mm
|}
Because laser cutters produce oversized holes, tolerances must be adjusted from the actual values. This can vary with material size, focus, material and laser type.
{| class="wikitable"
|+Lasercutting dimensions
!
!M3
!M4
|-
|Clearance Hole
|2.8mm
|3.8mm
|-
|Tapping Hole (standard screw)
|2.4mm
|3.4mm
|-
|Tapping Hole (self-threading screw)
|
|
|-
|Hex Nut Width
|
|
|-
|Square Nut Width
|
|
|-
|Heat-Set Inserts
|4.8mm
|5.3mm
|}

== Re-order Links ==
Note: If a part is out of stock or requiring shipping from a different location, the "corrosion resistance" equivalent can be substituted, however slightly more expensive.
{| class="wikitable"
|+M3
!Part
!McMaster SKU
!Link
|-
|M3 Socket Head, 6mm
|91292A111
|https://www.mcmaster.com/catalog/91292A111
|-
|M3 Socket head, 8mm
|91292A112
|[https://www.mcmaster.com/91292A112 https://www.mcmaster.com/catalog/91292A112]
|-
|M3 Socket Head, 12mm
|91292A114
|https://www.mcmaster.com/catalog/91292A114
|-
|M3 Socket Head, 16mm
|91292A115
|https://www.mcmaster.com/catalog/91292A115
|-
|M3 Socket Head, 20mm
|91292A123
|https://www.mcmaster.com/catalog/91292A123
|-
|M3 Socket Head, 25mm
|91292A020
|https://www.mcmaster.com/catalog/91292A020
|-
|M3 Socket Head, 30mm
|91292A022
|https://www.mcmaster.com/catalog/91292A022
|-
|M3 Socket Head, 40mm
|91292A024
|https://www.mcmaster.com/catalog/91292A024
|-
|M3 Hex Nut
|91828A211
|https://www.mcmaster.com/catalog/91828A211
|-
|M3 Nylock Nut
|93625A100
|https://www.mcmaster.com/catalog/93625A100
|-
|M3 Square Nut
|97258A101
|https://www.mcmaster.com/catalog/97258A101
|-
|M3 Washer
|98689A112
|https://www.mcmaster.com/catalog/98689A112
|-
|M3 Oversize Washer
|91116A120
|https://www.mcmaster.com/catalog/91116A120
|-
|M3 Heat-Set Inserts
|94180A331
|https://www.mcmaster.com/catalog/94180A331
|}