Fang Breakout

The Fang Breakout is the secondary variety of breakout for the HONEY flight stack. It was introduced in the development of the HONEY Gen 1 Breakout, Viper. As of time of writing (Aug 10, 2017), it has no impending implementation scheme. It exists in the first revision of the HAB Breakout to facilitate two things -- one, the possible eventual need to break out the additional remaining pins, and, more importantly, two -- to enable directly using female jumper wires to tap signals directly from Viper, by providing a standard-pitch connector that can be both directly tapped or cabled.

The connector and associated cabling are: Connector: Samtec TST-156-01-F-D-RA Cabling: HCSD-28-D-XX.XX-01-S-N-G

The Fang Breakout pinout is very similar to the Venom Breakout, with some slight alterations:

5V

3.3V BUS

VBATT (4.2V)

12V

1.8V

SDA

SCL

MOSI

MISO

SCLK

VA_PWM

CHIRP

R_MCU

R_ALL

S_READY

LOW_PWR

FMODE

SYS_F3

SYS_F4

SYS_F5

SYS_F6

CAN2_H

CAN2_L

(+5 S)

(-5 S)

(+12 S)

(-12 S)

GND

5V

3.3V BUS

VBATT (4.2V)

12V

VADJ OUT

TX4

RX4

TX6

RX6

DAC0

DAC1

AV29

AV42

AV17

AV16

AV35

AV36

AV37

AV38

AVA10

AV51

AV52

AV53

CAN1_H

CAN1_L

CAN_SPD

3.3V CAN

GND