Difference between revisions of "Project X"

From Stanford SSI Wiki
Jump to navigation Jump to search
Line 1: Line 1:
{{balloon-stub}}
+
[[File:Project X 020816.4.jpg | right |x300px| thumb| <center> Team Lead Sruti Arulmani </center>]]
 +
Project X is a 2015-2016 [[Balloons]] team project targeted towards the creation, development, and refinement of sensor payloads for high-altitude balloons. The current focus of Project X is the collection of data regarding atmospheric quality and composition.
  
Project X is a 2015-2016 [[Balloons]] team project targeted towards the creation, development, and refinement of sensor payloads for high-altitude balloons. The current focus of Project X is the collection of data regarding atmospheric quality and makeup.  
+
The current team lead is Sruti Arulmani; other team members include Nicholas Kuntz, Armin Namavari, and Callie Van Winkle.
  
The current team lead is Sruti Arulmani.
 
  
 
== Sensors ==
 
== Sensors ==
 
[[File:Project X 020816.3.jpg | right | thumb| <center> Project X Sensors </center>]]
 
[[File:Project X 020816.3.jpg | right | thumb| <center> Project X Sensors </center>]]
Project X has had success testing and incorporating the following sensors into HAB payloads (pictured at right):
+
Project X has had success testing and incorporating the following sensors (pictured at left) into HAB payloads in conjunction with an Arduino Uno unit:
 
*Carbon Dioxide Sensor (SainSmart MG-811)
 
*Carbon Dioxide Sensor (SainSmart MG-811)
 
*Ozone Sensor (SainSmart MQ-131)
 
*Ozone Sensor (SainSmart MQ-131)
Line 15: Line 15:
 
*Hazardous Gas Sensor (GikFun MQ-135)
 
*Hazardous Gas Sensor (GikFun MQ-135)
  
Project X is also in possession of the following sensors, but has yet to test or incorporate them into HAB payloads:
+
Project X is also in possession of the following sensors, but has yet to test or incorporate them into a HAB payload:
 
*LPG and Butane Sensor (GikFun MQ-2)
 
*LPG and Butane Sensor (GikFun MQ-2)
 
*Alcohol and Ethanol Sensor (GikFun MQ-3)
 
*Alcohol and Ethanol Sensor (GikFun MQ-3)
*Methane Sensor for Mega2560 (GikFun MQ-5)
+
*Methane Sensor for Arduino Uno Mega2560 (GikFun MQ-5)
 
*Isobutane and Propane Sensor (GikFun MQ-6)
 
*Isobutane and Propane Sensor (GikFun MQ-6)
 
*Combustible Gas Sensor (GikFun MQ-9)
 
*Combustible Gas Sensor (GikFun MQ-9)
 
  
 
== SSI-28 ==
 
== SSI-28 ==
Project X launched a payload as part of the [[SSI-28]] launch.
+
[[File:Project X 020816.1.jpg | left | thumb| <center> SSI-28 Gas Concentration vs Time </center>]]
[[File:Project X 020816.1.jpg | right | thumb| <center> SSI-28 Gas Concentration vs Time </center>]]
 
 
[[File:Project X 020816.2.jpg | right | thumb| <center> SSI-28 Gas Concentration vs Altitude </center>]]
 
[[File:Project X 020816.2.jpg | right | thumb| <center> SSI-28 Gas Concentration vs Altitude </center>]]
 +
Project X launched an experimental payload along with [[Project UV]] as part of the [[SSI-28]] launch.
 +
 +
After the payloads from [[SSI-28]] were recovered, it was discovered that the concentrations of airborne compounds that were tested for by Project X's sensors were several orders of magnitude smaller than the concentrations that these sensors were designed to test for. As a result, the sensors returned little useful data.
 +
 +
In order to resolve this issue for the next launch, Project X plans to incorporate operational amplifiers into the sensors' circuitry. These circuit components will amplify the signal output by each sensor, pushing detection into an order of magnitude more readily analyzable.
 +
 +
== SSI-29 and SSI-30==
 +
 +
 +
== Upcoming Goals ==
 +
 +
 +
  
 
{{balloon-footer}}
 
{{balloon-footer}}
  
 
[[Category: High Altitude Balloons]][[Category: Projects]]
 
[[Category: High Altitude Balloons]][[Category: Projects]]

Revision as of 01:46, 9 February 2016

Team Lead Sruti Arulmani

Project X is a 2015-2016 Balloons team project targeted towards the creation, development, and refinement of sensor payloads for high-altitude balloons. The current focus of Project X is the collection of data regarding atmospheric quality and composition.

The current team lead is Sruti Arulmani; other team members include Nicholas Kuntz, Armin Namavari, and Callie Van Winkle.


Sensors

Project X Sensors

Project X has had success testing and incorporating the following sensors (pictured at left) into HAB payloads in conjunction with an Arduino Uno unit:

  • Carbon Dioxide Sensor (SainSmart MG-811)
  • Ozone Sensor (SainSmart MQ-131)
  • Methane Sensor (GikFun MQ-4)
  • Carbon Monoxide Sensor (GikFun MQ-7)
  • Hydrogen Sensor (GikFun MQ-8)
  • Hazardous Gas Sensor (GikFun MQ-135)

Project X is also in possession of the following sensors, but has yet to test or incorporate them into a HAB payload:

  • LPG and Butane Sensor (GikFun MQ-2)
  • Alcohol and Ethanol Sensor (GikFun MQ-3)
  • Methane Sensor for Arduino Uno Mega2560 (GikFun MQ-5)
  • Isobutane and Propane Sensor (GikFun MQ-6)
  • Combustible Gas Sensor (GikFun MQ-9)

SSI-28

SSI-28 Gas Concentration vs Time
SSI-28 Gas Concentration vs Altitude

Project X launched an experimental payload along with Project UV as part of the SSI-28 launch.

After the payloads from SSI-28 were recovered, it was discovered that the concentrations of airborne compounds that were tested for by Project X's sensors were several orders of magnitude smaller than the concentrations that these sensors were designed to test for. As a result, the sensors returned little useful data.

In order to resolve this issue for the next launch, Project X plans to incorporate operational amplifiers into the sensors' circuitry. These circuit components will amplify the signal output by each sensor, pushing detection into an order of magnitude more readily analyzable.

SSI-29 and SSI-30

Upcoming Goals

Balloon Launches
2014-15 SSI-19202122
2015-16 SSI-23(a) • 2425262728293031323334353637383940414243
2016-17 444546474849505152
2017-18
2018-19 8386879091
2019-20 929397
VE