Difference between revisions of "SSI-28"
Jump to navigation
Jump to search
| (10 intermediate revisions by 3 users not shown) | |||
| Line 2: | Line 2: | ||
| header = SSI-28 | | header = SSI-28 | ||
| img link = File:ssi_28.png | | img link = File:ssi_28.png | ||
| + | | designations = UV-1, X-1 | ||
| launch date = January 30, 2016, 10:42:58 | | launch date = January 30, 2016, 10:42:58 | ||
| launch site = 2093 San Juan Drive, Hollister, CA | | launch site = 2093 San Juan Drive, Hollister, CA | ||
| Line 12: | Line 13: | ||
}} | }} | ||
| − | SSI-28 was the 28th launch of the SSI Balloons team and the first launch for the experimental payloads of [[ | + | SSI-28 was the 28th launch of the SSI Balloons team and the first launch for the experimental payloads of [[Project UV]] and [[Project X]]. It flew 169.8 kilometers over a course of 2.5 hours, reaching an altitude of 24 Kilometers before landing. It was a complete success, querying ultraviolet A and ultraviolet B concentrations in correlation with altitude, and the concentrations of specific gasses at different altitudes, in addition to powering heaters and capturing visuals with a camera. |
== Pre-Launch == | == Pre-Launch == | ||
[[File:SSI_28_03.jpg | left | thumb | <center> The team</center>]] | [[File:SSI_28_03.jpg | left | thumb | <center> The team</center>]] | ||
| − | SSI-28 was part of a combined experimental balloon launch with [[ | + | SSI-28 was part of a combined experimental balloon launch with [[Project UV]] and [[Project X]] designed to provide preliminary data for these research projects. |
== Payload Specifications == | == Payload Specifications == | ||
[[File:SSI_28_05.jpg | right | thumb| <center> The Teensy electronics </center>]] | [[File:SSI_28_05.jpg | right | thumb| <center> The Teensy electronics </center>]] | ||
| − | This payload utilized a Teensy3.2 instead of an Arduino, allowing | + | This payload utilized a Teensy3.2 instead of an Arduino, allowing for better computational power, more memory, and more sensor readings at a higher resolution. The teensy measured time, altitude, UV(A) & UV(B) in watts/cm^2, and gas concentrations of Hydrogen, Methane, Carbon Dioxide, Carbon Monoxide, Ozone, and particulate matter. It was also capable of self regulating its temperature, and writing data to an SD card. |
== Launch site == | == Launch site == | ||
[[File:SSI_28_02.jpg | left | thumb| <center> The launch site </center>]] | [[File:SSI_28_02.jpg | left | thumb| <center> The launch site </center>]] | ||
| − | SSI- | + | SSI-28 was launched from a park near 2093 San Juan Drive, Hollister, CA at 10:42AM. The team left campus at 5:30AM, had no issues on site, and returned to campus at 9:00PM. |
== The Flight == | == The Flight == | ||
[[File:SSI_28_04.png | right | thumb| <center> 24Km view</center>]] | [[File:SSI_28_04.png | right | thumb| <center> 24Km view</center>]] | ||
| − | [[File:SSI_28_01.png | right| thumb| <center> Ground track </center>]] | + | [[File:SSI_28_01.png | right | thumb| <center> Ground track </center>]] |
| + | [[File:SSI_28_07.png | right | thumb| <center> Altitude </center>]] | ||
SSI-28 was outfitted with a balloon with about .5 net Kg of lift. | SSI-28 was outfitted with a balloon with about .5 net Kg of lift. | ||
| − | Because of high winds, the balloon drifted farther than expected traveling 169.8 kilometers away. | + | Because of high winds, the balloon drifted farther than expected, traveling 169.8 kilometers away. |
== Debriefing == | == Debriefing == | ||
SSI-28 was a success and fulfilled all of the initial goals set out by the team. | SSI-28 was a success and fulfilled all of the initial goals set out by the team. | ||
| − | *Successful data collection and logging of [[ | + | *Successful data collection and logging of [[Project UV]] data |
| − | *Successful data collection and logging of [[ | + | *Successful data collection and logging of [[Project X]] data |
*Successful implementation of a heater control mechanism | *Successful implementation of a heater control mechanism | ||
*Successful landing and recovery | *Successful landing and recovery | ||
| Line 48: | Line 50: | ||
File:SSI_28_02.jpg | <center> The launch site </center> | File:SSI_28_02.jpg | <center> The launch site </center> | ||
File:SSI_28_00.png | <center> Popped Balloon</center> | File:SSI_28_00.png | <center> Popped Balloon</center> | ||
| + | File:SSI_28_07.png | <center> The flight</center> | ||
| + | File:SSI_28_09.png | <center> Project UV data</center> | ||
| + | File:SSI_28_10.png | <center> Project UV data</center> | ||
| + | File:SSI_28_08.png | <center> Project X data</center> | ||
</gallery> | </gallery> | ||
{{balloon-footer}} | {{balloon-footer}} | ||
[[Category: High Altitude Balloons]][[Category: Balloon Launches]] | [[Category: High Altitude Balloons]][[Category: Balloon Launches]] | ||
Latest revision as of 23:17, 1 February 2016
| SSI-28 | ||||
|---|---|---|---|---|
| 250px | ||||
| Designations | UV-1, X-1 | |||
| Launch date | January 30, 2016, 10:42:58 | |||
| Launch site | 2093 San Juan Drive, Hollister, CA | |||
| Launch coordinates | 36.84857,-121.43262 | |||
| Flight duration | 2:35:19 | |||
| Landing coordinates | 36.51287,-119.57532 | |||
| ||||
SSI-28 was the 28th launch of the SSI Balloons team and the first launch for the experimental payloads of Project UV and Project X. It flew 169.8 kilometers over a course of 2.5 hours, reaching an altitude of 24 Kilometers before landing. It was a complete success, querying ultraviolet A and ultraviolet B concentrations in correlation with altitude, and the concentrations of specific gasses at different altitudes, in addition to powering heaters and capturing visuals with a camera.
Pre-Launch
SSI-28 was part of a combined experimental balloon launch with Project UV and Project X designed to provide preliminary data for these research projects.
Payload Specifications
This payload utilized a Teensy3.2 instead of an Arduino, allowing for better computational power, more memory, and more sensor readings at a higher resolution. The teensy measured time, altitude, UV(A) & UV(B) in watts/cm^2, and gas concentrations of Hydrogen, Methane, Carbon Dioxide, Carbon Monoxide, Ozone, and particulate matter. It was also capable of self regulating its temperature, and writing data to an SD card.
Launch site
SSI-28 was launched from a park near 2093 San Juan Drive, Hollister, CA at 10:42AM. The team left campus at 5:30AM, had no issues on site, and returned to campus at 9:00PM.
The Flight
SSI-28 was outfitted with a balloon with about .5 net Kg of lift. Because of high winds, the balloon drifted farther than expected, traveling 169.8 kilometers away.
Debriefing
SSI-28 was a success and fulfilled all of the initial goals set out by the team.
- Successful data collection and logging of Project UV data
- Successful data collection and logging of Project X data
- Successful implementation of a heater control mechanism
- Successful landing and recovery
Gallery
24Km view 
The team 
Ground track 
The Teensy electronics 
The retrieved payload 
The launch site 
Popped Balloon 
The flight 
Project UV data 
Project UV data 
Project X data
| Balloon Launches | |
|---|---|
| 2014-15 | SSI-19 • 20 • 21 • 22 |
| 2015-16 | SSI-23(a) • 24 • 25 • 26 • 27 • 28 • 29 • 30 • 31 • 32 • 33 • 34 • 35 • 36 • 37 • 38 • 39 • 40 • 41 • 42 • 43 |
| 2016-17 | 44 • 45 • 46 • 47 • 48 • 49 • 50 • 51 • 52 |
| 2017-18 | |
| 2018-19 | 83 • 86 • 87 • 90 • 91 |
| 2019-20 | 92 • 93 • 97 |
| V • E | |