| header = Gen 1 Architecture
...pring of 2017, when it was replaced by [[Gen 2 Architecture | HONEY]], the Gen 2 Architecture.
...
6 KB (940 words) - 23:17, 23 August 2017
...onics Platform. It implements most of the functionality that exists in Gen 4 rev 2 Avionics, but the architecture of the boards has been changed, and fu
Several changes were made from Rev 4.2 in order to reduce the complexity:<br/>
...
5 KB (684 words) - 05:36, 15 July 2018
Data (4-500 bytes)
|The Count (Gen 4 Avionics)
...
11 KB (1,773 words) - 07:39, 18 September 2017
...et consists of the standard header, 3 bytes of additional information, and 4 bytes of data payload. Subsequent CAN Packets consist of the 1 byte header
Source (0 - 16) (4 bit)
...
28 KB (4,239 words) - 23:19, 15 August 2017
== Gen IV Design ==
...used for ValBal's previous flights. The team met at the launch site after 4 pm, with most members returning from the recovery of [[SSI-30]] to meet a c
...
6 KB (987 words) - 20:49, 8 September 2017
Changes to the HONEY Architecture were made with Avionics Gen 5 and BMS Gen 3, which split the data bus into two in order to reduce routing complexity.
...stack data bus, a 14-pin (7x2) connector for the flight stack power bus, a 4-pin (2x2) connector for the flight stack CAN bus, and an 2 pin (2x2) connec
...
21 KB (3,473 words) - 00:32, 12 August 2018
The '''Balloons Gen 1 Avionics Platform''' is the first core avionics suite developed by HABEES
...18k->6.2k->91.k->GND is implemented to specify an overvoltage threshold of 4.52V and an undervoltage threshold of 2.3V. A current limit of 5 amps is imp
...
15 KB (2,381 words) - 22:45, 23 August 2017
...the HONEY Stack, but can alternatively also be swapped out with [[Balloons Gen 1 Mini-Avionics | Big Bird]] by compromising some functionality and utility
'''The Count''' is the first of the HABEES Avionics boards to be 4-layer. This was necessitated by the increased density of components, and, m
...
7 KB (1,039 words) - 03:18, 23 August 2017
...tention plate (initially bass wood). This outer retention plate had four 1/4" holes. When slotted into the appropriate chamber portal, the block was cla
SPACE Mk 1 flew on the first launch of 2015, housing SSI Gen 1 Avionics. It proved to be extremely thermally insulative (more than a sty
...
7 KB (1,225 words) - 23:11, 12 February 2016
* 4-Boards (Base + 2 FTC): 16mm spacing, 30/25mm fixture bolt. (McMaster 94669A
...~ 500 mA), as well as powering the Dorji Radio Transceivers on Macaw (1W @ 4.2V).
...
25 KB (4,218 words) - 22:41, 31 August 2017
...tle is, of course, the name of your board. For example -- HAB Avionics Gen 4.
...
19 KB (3,375 words) - 23:21, 15 August 2017
