41
edits
Changes
→Pre-Flight Checklist
* Battery fully charged (around 8.4v)
* Battery fully charged (around 8.4v)
* SD card has sufficient capacity (Data logs generate about 10 megabytes per hour)
* SD card has sufficient capacity (Data logs generate about 10 megabytes per hour)
* SD installed into the slot and retained with tape
* SD installed into the slot
* Internal power jumper installed (top right)
* Internal power jumper installed (top right)
* Board powered on, displays green LED and correct chips, and then powered off again
* Board powered on, displays green LED and correct chips, and then powered off again
* SD card checked to verify data is being logged properly. Re-inserted into SD card slot, and retained with electrical tape.
Pre-launch:
Pre-launch: