Uploads by Vnguyen5
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 05:23, 15 July 2018 | G3 usbcharger.PNG (file) |  |
47 KB | 1 | |
| 05:23, 15 July 2018 | G3 top.PNG (file) |  |
56 KB | 1 | |
| 05:23, 15 July 2018 | G3 tmon.PNG (file) |  |
56 KB | 1 | |
| 05:22, 15 July 2018 | G3 protector.PNG (file) |  |
59 KB | 1 | |
| 05:22, 15 July 2018 | G3 output connectors.PNG (file) |  |
91 KB | 1 | |
| 05:21, 15 July 2018 | G3 ldo.PNG (file) |  |
40 KB | 1 | |
| 05:21, 15 July 2018 | G3 boost.PNG (file) |  |
61 KB | 1 | |
| 05:21, 15 July 2018 | G3 batteries.PNG (file) |  |
21 KB | 1 | |
| 05:20, 15 July 2018 | G5 top.PNG (file) |  |
200 KB | 1 | |
| 05:19, 15 July 2018 | G5 thermocouple.PNG (file) |  |
36 KB | 1 | |
| 05:19, 15 July 2018 | G5 teensycore.PNG (file) |  |
206 KB | 1 | |
| 05:18, 15 July 2018 | G5 stackbus.PNG (file) |  |
62 KB | 1 | |
| 05:18, 15 July 2018 | G5 rb connector.PNG (file) |  |
25 KB | 1 | |
| 05:17, 15 July 2018 | G5 pressure sensors.PNG (file) |  |
59 KB | 1 | |
| 05:17, 15 July 2018 | G5 multiplexer.PNG (file) |  |
59 KB | 1 | |
| 05:17, 15 July 2018 | G5 micro sd.PNG (file) |  |
22 KB | 1 | |
| 05:16, 15 July 2018 | Leds.PNG (file) |  |
47 KB | 1 | |
| 05:16, 15 July 2018 | Gps.PNG (file) |  |
80 KB | 1 | |
| 05:15, 15 July 2018 | GFSK.PNG (file) |  |
110 KB | 1 | |
| 05:15, 15 July 2018 | Cutdown.PNG (file) |  |
49 KB | Used to sever the payload from the balloon in a controlled manner. Use cases include cutting down at a particular altitude, or to limit how far the balloon travels. | 1 |
| 05:13, 15 July 2018 | Can.PNG (file) |  |
55 KB | Used for high-speed communication between boards on the stack. | 1 |
| 05:12, 15 July 2018 | Bypasscaps.PNG (file) |  |
35 KB | Capacitors charged directly by the batteries used to deliver the initial burst of current to parts of the system faster than the batteries can, due to their closer proximity to loads than the batteries. | 1 |
| 04:34, 15 July 2018 | Gen5bms s.PNG (file) |  |
263 KB | Cupcake PCB layout | 1 |
| 04:25, 15 July 2018 | Gen5s.PNG (file) |  |
292 KB | PCB Layout of Gen5 Avionics. | 1 |
| 05:47, 22 June 2017 | Macaw.jpg (file) |  |
2.1 MB | Assembled radio board | 1 |
| 05:43, 22 June 2017 | HAB Macaw PCB.PNG (file) |  |
94 KB | PCB Layout for Macaw. | 1 |
| 05:37, 22 June 2017 | HAB Macaw VHFTX.PNG (file) |  |
35 KB | Schematic showing the connections to the third Dorji radio. | 1 |
| 05:36, 22 June 2017 | HAB Macaw VHFRX.PNG (file) |  |
32 KB | Schematic of the connections to the second Dorji radio. | 1 |
| 05:35, 22 June 2017 | HAB Macaw TopSheet.PNG (file) |  |
132 KB | Main schematic of Macaw. | 1 |
| 05:34, 22 June 2017 | HAB Macaw Stackbus.PNG (file) |  |
67 KB | Avionics Stackbus connections for Macaw | 1 |
| 05:34, 22 June 2017 | HAB Macaw APRS.PNG (file) |  |
45 KB | Schematic of the APRS Radio on Macaw. | 1 |
