Changes

1,765 bytes added ,  18:24, 16 December 2020
no edit summary
Line 8: Line 8:  
* when2meet form [https://www.when2meet.com/?9692556-kRKgF] to indicate availability for avionics workshops and events
 
* when2meet form [https://www.when2meet.com/?9692556-kRKgF] to indicate availability for avionics workshops and events
   −
Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be an official member of SSI and either pay dues or have them waived. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]
+
Please also join the slack channel #av-onboarding-2020. In order to go through onboarding you must be a member of SSI. See the How to Join SSI wiki page for more information on how to join slack and pay/waive dues. [https://wiki.stanfordssi.org/How_to_Join_SSI]
Our first meeting will be '''Wednesday, September 22 at 8 PM'''.
+
 
 +
'''If you've finished a module or are running into issues, please fill out the following form. [https://tinyurl.com/ssi-av-onboarding-2020]'''
    
===Lab 64===
 
===Lab 64===
Line 45: Line 46:     
Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]
 
Sparkfun article on I2C [https://learn.sparkfun.com/tutorials/i2c]
 +
 +
== Module 0: Safety ==
 +
* We're here to help you! Ask us if you have any questions.
 +
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
 +
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board. 
 +
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
 +
* '''Always double check how you've wired everything on the breadboard before connecting the Feather to a micro USB cable or to the Feather battery. '''
 +
 +
== Module 1: Intro ==
 +
Watch the following video. [https://www.youtube.com/watch?v=xhKKqDbDuHE&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=3]
 +
 +
== Module 2: Parts Overview ==
 +
Watch the following video. [https://www.youtube.com/watch?v=XU-bfNY4TT0&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=4]
 +
 +
== Module 3: Setting up the Feather ==
 +
Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]
 +
 +
== Module 4: Serial demo Module ==
 +
Watch the following video. [https://www.youtube.com/watch?v=l4EaoHGZOEQ&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=2]
 +
 +
== Module 5: LED Demo Module ==
 +
Watch the following video. [https://www.youtube.com/watch?v=1mK70pcoVTY&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=5]
 +
 +
== Module 6: Anemometer Demo Module ==
 +
Watch the following video. [https://www.youtube.com/watch?v=nFOJzZa_s8A&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=1]
17

edits