17
edits
Changes
Avionics Onboarding 2020 (view source)
Revision as of 18:24, 16 December 2020
, 18:24, 16 December 2020no edit summary
* We're here to help you! Ask us if you have any questions.
* We're here to help you! Ask us if you have any questions.
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. Since we're working remotely this quarter, it'll be difficult to send replacement parts.
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
* '''Always double check how you've wired everything on the breadboard before connecting the Feather to a micro USB cable or to the Feather battery. '''
== Module 1: Intro ==
== Module 1: Intro ==
Watch the following video. [https://drive.google.com/file/d/1hGY2tyMmSVdJ1w7BurlsysGHCRrfPqR0/view?usp=sharing]
Watch the following video. [https://www.youtube.com/watch?v=xhKKqDbDuHE&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=3]
== Module 2: Parts Overview ==
== Module 2: Parts Overview ==
Watch the following video. [https://drive.google.com/file/d/1cZH21qZDNko9VZfaTsGhMvSKzUcryBmY/view?usp=sharing]
Watch the following video. [https://www.youtube.com/watch?v=XU-bfNY4TT0&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=4]
== Module 3: Setting up the Feather ==
== Module 3: Setting up the Feather ==
Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]
Unfortunately, we don't have a video for this module yet. We'd recommend you follow the Adafruit tutorial. [https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/setup]
== Serial demo Module ==
== Module 4: Serial demo Module ==
Watch the following video. [https://drive.google.com/file/d/14o_wplIWJt64c7JSa7o9i4tQPk_LrhJL/view?usp=sharing]
Watch the following video. [https://www.youtube.com/watch?v=l4EaoHGZOEQ&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=2]
== LED Demo Module ==
== Module 5: LED Demo Module ==
Watch the following video. [https://drive.google.com/file/d/1jcAhQDGqYDc8QFYw95TlDVoe20ed6MhN/view?usp=sharing]
Watch the following video. [https://www.youtube.com/watch?v=1mK70pcoVTY&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=5]
== Module 6: Anemometer Demo Module ==
Watch the following video. [https://www.youtube.com/watch?v=nFOJzZa_s8A&list=PLxpSdrnZoeo9ly8NlKgaPzWxLik9CZNq8&index=1]