Changes

Jump to navigation Jump to search
1,038 bytes removed ,  21:13, 28 September 2017
no edit summary
Line 1: Line 1:  
{{HONEY-sidebar
 
{{HONEY-sidebar
 
| header = Viper
 
| header = Viper
 +
| img link = File:Viper.jpg
 
| designer = Kirill Safin
 
| designer = Kirill Safin
 
| techline = Balloons Breakouts
 
| techline = Balloons Breakouts
Line 29: Line 30:     
Details of the Venom Breakout can be found on the [[Venom_Breakout | Venom Breakout]] page.
 
Details of the Venom Breakout can be found on the [[Venom_Breakout | Venom Breakout]] page.
 +
 +
[[File: Viper2.png | right| thumb | <center> Viper Routing </center>]]
    
=== Master Breakout ===
 
=== Master Breakout ===
 
In addition to the Venom Breakout, Viper also includes a larger, 56-pin 2.54mm (standard) pitch connector known as the Master Breakout -- or, more formally, the '''Fang Breakout'''.
 
In addition to the Venom Breakout, Viper also includes a larger, 56-pin 2.54mm (standard) pitch connector known as the Master Breakout -- or, more formally, the '''Fang Breakout'''.
   −
The ''Fang Breakout'' breaks out the remainder of what the Viper Breakout was unable to breakout, or what was deemed inessential for a payload to have access to. This includes the secondary CAN Bus and some additional avionics GPIO pins.  
+
The ''Fang Breakout'' breaks out the remainder of what the Viper Breakout was unable to breakout, or what was deemed inessential for a payload to have access to. This includes the secondary CAN Bus and some additional avionics GPIO pins.
 
  −
The connector and associated cabling are:
  −
Connector: Samtec TST-156-01-F-D-RA
  −
Cabling: HCSD-28-D-XX.XX-01-S-N-G
  −
 
  −
The Fang Breakout, at time of writing (Aug 10, 2017) has no impending implementation scheme. It exists in the first revision of the HAB Breakout to facilitate two things -- one, the possible eventual need to break out the additional remaining pins, and, more importantly, two -- to enable directly using female jumper wires to tap signals directly from Viper, by providing a standard-pitch connector that can be both directly tapped or cabled.
  −
 
  −
The Fang Breakout pinout is very similar to the Venom Breakout, with some slight alterations:
  −
 
  −
{| class="wikitable"
  −
|-
  −
|5V
  −
|3.3V BUS
  −
|VBATT (4.2V)
  −
|12V
  −
|1.8V
  −
|SDA
  −
|SCL
  −
|MOSI
  −
|MISO
  −
|SCLK
  −
|VA_PWM
  −
|CHIRP
  −
|R_MCU
  −
|R_ALL
  −
|S_READY
  −
|LOW_PWR
  −
|FMODE
  −
|SYS_F3
  −
|SYS_F4
  −
|SYS_F5
  −
|SYS_F6
  −
|CAN2_H
  −
|CAN2_L
  −
|(+5 S)
  −
|(-5 S)
  −
|(+12 S)
  −
|(-12 S)
  −
|GND
  −
|-
  −
|5V
  −
|3.3V BUS
  −
|VBATT (4.2V)
  −
|12V
  −
|VADJ OUT
  −
|TX4
  −
|RX4
  −
|TX6
  −
|RX6
  −
|DAC0
  −
|DAC1
  −
|AV29
  −
|AV42
  −
|AV17
  −
|AV16
  −
|AV35
  −
|AV36
  −
|AV37
  −
|AV38
  −
|AVA10
  −
|AV51
  −
|AV52
  −
|AV53
  −
|CAN1_H
  −
|CAN1_L
  −
|CAN_SPD
  −
|3.3V CAN
  −
|GND
  −
|}
     −
[[Category: High Altitude Balloons]][[Category: HABEES]][[Category: HONEY]]
+
[[Category:HONEY]]

Navigation menu