95
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + Line 12:
Line 12: − +
Balloons Radio Projects (view source)
Revision as of 07:00, 18 September 2017
, 07:00, 18 September 2017no edit summary
Sending data, position, atltiude, callsign, to receive stations all around the world. This is a low bandwidth DIGITAL signal that is frequency modulated. No need to pick up ourselves, will be automatically uploaded to aprs.fi. This is a ONE WAY comms method (from balloon to ground ONLY).
Sending data, position, atltiude, callsign, to receive stations all around the world. This is a low bandwidth DIGITAL signal that is frequency modulated. No need to pick up ourselves, will be automatically uploaded to aprs.fi. This is a ONE WAY comms method (from balloon to ground ONLY).
== ATV:- amateur TV ==
== ATV: amateur TV ==
Can be digital or analog (in our case it is analog), amplitude modulated signals, extremely high bandwidth (several MHz), live stream television. Need old huge TV for receiver. This is a ONE WAY comms method (from balloon to ground ONLY).
Can be digital or analog (in our case it is analog), amplitude modulated signals, extremely high bandwidth (several MHz), live stream television. Need old huge TV for receiver. This is a ONE WAY comms method (from balloon to ground ONLY).
ValBal's long range digital radio system used to send any information we want at variable speeds & bandwidths. Can get anywhere from 500bps to 1Mbps, and anywhere from 1000km to 10km range depending on speed and antenna type. Need personal receiver, demodulator, rpi, to upload to [[HABMC]]. Eventually will be used to have 1Hz refresh rate on HABMC for vb and give active control. This is a partial duplex comms method (bidirectional, but not at the same time).
ValBal's long range digital radio system used to send any information we want at variable speeds & bandwidths. Can get anywhere from 500bps to 1Mbps, and anywhere from 1000km to 10km range depending on speed and antenna type. Need personal receiver, demodulator, rpi, to upload to [[HABMC]]. Eventually will be used to have 1Hz refresh rate on HABMC for vb and give active control. This is a partial duplex comms method (bidirectional, but not at the same time).
[[Category:Balloons]]
[[Category:High Altitude Balloons]]