Difference between revisions of "L1 Certification"

From Stanford SSI Wiki
Jump to navigation Jump to search
(added links)
 
(143 intermediate revisions by 10 users not shown)
Line 1: Line 1:
{{Problems}}
+
[[File: CameronRocket.jpg|thumb|right|400px|Cameron Ramos before his L1 certification flight]]
  
In order to understand high power rocketry enough to launch and successfully recover an L1 rocket, you must read, live, and understand the following information. Level 1 Certification allows flyers to fly High Power Rockets with a total installed impulse up to 640 newton-seconds.
+
In order to understand high power rocketry enough to launch and successfully recover an L1 rocket, please make sure you have already read [[HPR Background Information]]. Level 1 Certification allows flyers to fly High Power Rockets with a total installed impulse up to 640 newton-seconds.
  
= Background Information =
+
Once you've read through this page, visit [[Launch Day]] for critical information on what to bring, wear, etc.
  
NASA's online [https://spaceflightsystems.grc.nasa.gov/education/rocket/shortr.html Beginner's Guide To Rockets] will get you started on many of the basic principles governing rocketry. If you manage to make your way through all of these, you will understand the vernacular often used in rocketry.
+
= Safety Codes =
  
 +
== NFPA 1127 and FAA 101 ==
 +
'''''Note: Might be better to just give summaries of each relevant section and only post links to full documents. Someone please fix.'''''
  
== Safety Codes ==
+
The National Fire Protection Association has multiple documents spanning different types of rocketry. Section 1122 governs model rockets and 1127 governs high powered rockets. We are most interested in 1127.
  
=== NAR ===
+
[http://unh.edu/rocketcats/NFPA-1127.pdf NFPA 1127] sets the rules and regulations for high power rocketry, including the motor classification system, rules for Range Safety Officers, and guidelines for the safe construction, use, and storage of rocket materials. Critically, it also includes the formal definition of High Power Rocketry, and it is this definition that is referenced in ITAR.
  
Materials. I will use only lightweight, non-metal parts for the nose, body, and fins of my rocket.
+
The Federal Aviation Administration Regulations also has a relevant section to the high powered rocketry community. [http://www.ecfr.gov/cgi-bin/text-idx?rgn=div5&node=14:2.0.1.3.15#sp14.2.101.c FAA 101 Subpart C, Amateur Rockets]. Here are the extremely relevant sections.
  
Motors. I will use only certified, commercially-made model rocket motors, and will not tamper with these motors or use them for any purposes except those recommended by the manufacturer.
+
;§101.22  Definitions.
 +
The following definitions apply to this subpart:
  
Ignition System. I will launch my rockets with an electrical launch system and electrical motor igniters. My launch system will have a safety interlock in series with the launch switch, and will use a launch switch that returns to the “off” position when released.
+
:(a) Class 1—Model Rocket means an amateur rocket that:
  
Misfires. If my rocket does not launch when I press the button of my electrical launch system, I will remove the launcher’s safety interlock or disconnect its battery, and will wait 60 seconds after the last launch attempt before allowing anyone to approach the rocket.
+
::(1) Uses no more than 125 grams (4.4 ounces) of propellant;
Launch Safety. I will use a countdown before launch, and will ensure that everyone is paying attention and is a safe distance of at least 15 feet away when I launch rockets with D motors or smaller, and 30 feet when I launch larger rockets. If I am uncertain about the safety or stability of an untested rocket, I will check the stability before flight and will fly it only after warning spectators and clearing them away to a safe distance. When conducting a simultaneous launch of more than ten rockets I will observe a safe distance of 1.5 times the maximum expected altitude of any launched rocket.
 
Launcher. I will launch my rocket from a launch rod, tower, or rail that is pointed to within 30 degrees of the vertical to ensure that the rocket flies nearly straight up, and I will use a blast deflector to prevent the motor’s exhaust from hitting the ground. To prevent accidental eye injury, I will place launchers so that the end of the launch rod is above eye level or will cap the end of the rod when it is not in use.
 
Size. My model rocket will not weigh more than 1,500 grams (53 ounces) at liftoff and will not contain more than 125 grams (4.4 ounces) of propellant or 320 N-sec (71.9 pound-seconds) of total impulse.
 
Flight Safety. I will not launch my rocket at targets, into clouds, or near airplanes, and will not put any flammable or explosive payload in my rocket.
 
Launch Site. I will launch my rocket outdoors, in an open area at least as large as shown in the accompanying table, and in safe weather conditions with wind speeds no greater than 20 miles per hour. I will ensure that there is no dry grass close to the launch pad, and that the launch site does not present risk of grass fires.
 
Recovery System. I will use a recovery system such as a streamer or parachute in my rocket so that it returns safely and undamaged and can be flown again, and I will use only flame-resistant or fireproof recovery system wadding in my rocket.
 
Recovery Safety. I will not attempt to recover my rocket from power lines, tall trees, or other dangerous places.
 
  
= L1 Requirements =
+
::(2) Uses a slow-burning propellant;
 +
 
 +
::(3) Is made of paper, wood, or breakable plastic;
 +
 
 +
::(4) Contains no substantial metal parts; and
 +
 
 +
::(5) Weighs no more than 1,500 grams (53 ounces), including the propellant.
  
Sources of information: [http://www.tripoli.org/Level1 TRA L1 certification info] and [http://www.nar.org/high-power-rocketry-info/level-1-hpr-certification/ NAR L1 certification info].
+
:(b) Class 2—High-Power Rocket means an amateur rocket other than a model rocket that is propelled by a motor or motors having a combined total impulse of 40,960 Newton-seconds (9,208 pound-seconds) or less.
The following is a combination of the NAR and TRA requirements and rules.
 
  
You must be at least 18 years old to be certified for Level 1. Although it is good practice to already be a member of NAR and/or TRA before certifying, in practice it is not enforced. Motors must be certified and non-experimental.  
+
:(c) Class 3—Advanced High-Power Rocket means an amateur rocket other than a model rocket or high-power rocket.
  
Your certifier (in NAR) needs to be either two people with the level you are attempting for, or one person with the level above the one you are attempting for. They must witness the flight.
+
;§101.23  General operating limitations.
 +
:(a) You must operate an amateur rocket in such a manner that it:
  
 +
::(1) Is launched on a suborbital trajectory;
  
 +
::(2) When launched, must not cross into the territory of a foreign country unless an agreement is in place between the United States and the country of concern;
  
=== Airframe ===
+
::(3) Is unmanned; and
The rocket must be built by the flyer.  The rocket shall have a display on the exterior identifying the calculated center of pressure.  The rocket must be of "conventional rocket design".  "Odd Rockets" including flying pyramids, saucers and flying spools will not be allowed for any certification flight.  The rocket may be either a kit or scratch built.  Scratch built rockets may contain commercially built components.
 
  
=== Recovery ===
+
::(4) Does not create a hazard to persons, property, or other aircraft.
Standard parachute recovery is required.  Non-parachute recovery methods (e.g. tumble, helicopter, gliding, etc) are not permitted for certification flights.  If the rocket is using dual deployment, the first recovery event may be via a drogue-less or streamer as long as the main or second event uses a standard parachute.
 
  
=== Motor ===
+
:(b) The FAA may specify additional operating limitations necessary to ensure that air traffic is not adversely affected, and public safety is not jeopardized.
The certification flight must be with a single certified H or I motor (tested total impulse between 160.01 and 640.00 n-sec).TRA does not allow staged and/or Clustered rockets for certification flights while NAR states you must use at least one HPR motor on your certification rocket. The flyer shall be observed by the certifying member or their designated representative during the assembly (if a reload or hybrid) and preparation of the motor. Single use motors are permitted.
 
  
=== Electronics ===
+
;§101.25  Operating limitations for Class 2-High Power Rockets and Class 3-Advanced High Power Rockets.
Electronics are not required for level 1 certification flights.
+
When operating Class 2-High Power Rockets or Class 3-Advanced High Power Rockets, you must comply with the General Operating Limitations of §101.23. In addition, you must not operate Class 2-High Power Rockets or Class 3-Advanced High Power Rockets—
  
=== Pre-flight Inspection ===
+
:(a) At any altitude where clouds or obscuring phenomena of more than five-tenths coverage prevails;
The model will be subjected to a safety inspection prior to flight. The safety inspection form is on the back of the NAR High Power Certification Application. During the safety inspection the modeler will be expected to provide oral answers to technical questions related to the safety and construction of his model. The questions may include (but not limited to) identification of the model’s center of gravity and center of pressure, methods used to determine model stability, and interpretation of the rocket motor’s designation. The certification team will initial (or check) the blocks indicating that model safety, motor certification, and the existence of a FAA waiver (if required) in effect were verified prior to flight.
 
  
=== Certification Flight ===
+
:(b) At any altitude where the horizontal visibility is less than five miles;
Level 1 Certification flight may take place at any insured launch. The certifying member (i.e. Prefect, TRA Director, NAR certifiers or TAP Member) must be present and witness the certification flight. The certifying member must witness the rocket ascend in a stable manner and descend in stabilized manner controlled by the recovery system.
 
  
=== Post-Flight Inspection ===
+
:(c) Into any cloud;
The rocket must be presented to the certifying member for inspection. If the rocket cannot be recovered, but can be inspected in place (power lines, tree, etc...) this is acceptable. The certifying member shall inspect the rocket for excessive damage. Excessive damage shall be considered damage to the point that if the flyer were handed another motor, the rocket could not be put on the pad and flown again safely. Damage caused by wind dragging will not cause a disqualification. If successful, the certifiers will sign the correct sheet to indicate that the certification attempt was successfully completed.
 
  
== Post-Post-Flight
+
:(d) Between sunset and sunrise without prior authorization from the FAA;
The certification sheets are returned to NAR or TRA Headquarters. No fees are required. The certification sheet must be returned by the certified individual or the event sponsors to NAR or TRA Headquarters to allow updating the NAR or TRA database. NAR sends an updated membership card showing the certification level upon receipt of the certification paperwork.
 
  
=== Non-certification ===
+
:(e) Within 9.26 kilometers (5 nautical miles) of any airport boundary without prior authorization from the FAA;
Any of the following will result in non-certification for a certification flight:
 
:*Motor Cato
 
:*Excessive Damage
 
:*No recovery system deployment or tangled recovery system deployment
 
:*Rocket drifting outside the specified launch range
 
:*Components coming down not attached to the recovery system.
 
:*Any other violation of TRA safety code associated with this particular flight.
 
:*Any other legitimate reason the certifying member deems merits non-certification
 
  
= Launch Locations =
+
:(f) In controlled airspace without prior authorization from the FAA;
  
Map
+
:(g) Unless you observe the greater of the following separation distances from any person or property that is not associated with the operations:
  
Time launch begins
+
::(1) Not less than one-quarter the maximum expected altitude;
  
etc
+
::(2) 457 meters (1,500 ft.);
  
 +
:(h) Unless a person at least eighteen years old is present, is charged with ensuring the safety of the operation, and has final approval authority for initiating high-power rocket flight; and
  
= Launch Day Procedures =
+
:(i) Unless reasonable precautions are provided to report and control a fire caused by rocket activities.
  
== Who You Will Meet ==
+
;§101.29  Information requirements.
 +
:(a) Class 2—High-Power Rockets. When a Class 2—High-Power Rocket requires a certificate of waiver or authorization, the person planning the operation must provide the information below on each type of rocket to the FAA at least 45 days before the proposed operation. The FAA may request additional information if necessary to ensure the proposed operations can be safely conducted. The information shall include for each type of Class 2 rocket expected to be flown:
  
RSO
+
::(1) Estimated number of rockets,
  
Mike
+
::(2) Type of propulsion (liquid or solid), fuel(s) and oxidizer(s),
  
Cliff
+
::(3) Description of the launcher(s) planned to be used, including any airborne platform(s),
  
Stu
+
::(4) Description of recovery system,
  
== What You Need To Bring ==
+
::(5) Highest altitude, above ground level, expected to be reached,
  
People Fuel - water food money etc
+
::(6) Launch site latitude, longitude, and elevation, and
  
Car Fuel - petrol
+
::(7) Any additional safety procedures that will be followed.
  
Appropriate Clothing
+
== TRA and NAR Codes ==
  
== Vendors ==
+
Useful documents:
 +
*[http://www.tripoli.org/Portals/1/Documents/Safety%20Code/OPSC%202013%20v1.0.pdf Tripoli Rocketry Association Safe Launch Practices]. Great document on when and how to safely launch your rocket.
 +
*[http://www.tripoli.org/Portals/1/Documents/Safety%20Code/RSO%20Guidelines%20v1.0.pdf RSO Guidelines]. Fantastic resource to understand what Range Safety Officers look for.
 +
*[http://www.nar.org/safety-information/high-power-rocket-safety-code/ NAR's High Power Rocketry Safety Code]. Very good resources, summarized further on.
 +
*[http://www.tripoli.org/Portals/1/Documents/Safety%20Code/HighPowerSafetyCode%202012%20v1.0.pdf TRA's Code for High Power Rocketry]. This resource is pretty scarce, would not look here for explicit instructions.
  
BAR
+
For reference, here is a summary of NAR's safety code. For an non-edited version of NAR's code, check out the links above.
  
== Range Layout ==
+
*Certification. I will only fly high power rockets or possess high power rocket motors that are within the scope of my user certification and required licensing.
  
Big, cars on the side, site in the middle
+
*Materials. I will use only lightweight materials such as paper, wood, rubber, plastic, fiberglass, or when necessary ductile metal, for the construction of my rocket.
  
== Packing Your Parachute ==
+
*Motors. I will use only certified, commercially made rocket motors.
  
It should not be too tight. Etc.
+
*Ignition System. I will launch my rockets with an electrical launch system, and with electrical motor igniters that are installed in the motor only after my rocket is at the launch pad or in a designated prepping area. The electronics will have an off and on switch. They will turned off until my rocket is in the launching position.
  
Here is a video.
+
*Misfires. If my rocket does not launch when I press the button of my electrical launch system, I will remove the launcher’s safety interlock or disconnect its battery, and will wait 60 seconds after the last launch attempt before allowing anyone to approach the rocket.
  
Here is how a NAR member does it. (Cliff)
+
*Launch Safety. I will use a 5-second countdown before launch. I will ensure that a means is available to warn participants and spectators in the event of a problem. I will ensure that no person is closer to the launch pad than allowed by the accompanying Minimum Distance Table. I will check the stability of my rocket before flight and will not fly it if it cannot be determined to be stable.  
  
Look at these great diagrams.
+
*Launcher. I will launch my rocket from a stable device that provides rigid guidance until the rocket has attained a speed that ensures a stable flight, and that is pointed to within 20 degrees of vertical. I will use a blast deflector to prevent the motor’s exhaust from hitting the ground.  
  
== Prepping Your Motor ==
+
*Size. My rocket will not contain any combination of motors that total more than 40,960 N-sec of total impulse. My rocket will not weigh more at liftoff than one-third of the certified average thrust of the high power rocket motor(s) intended to be ignited at launch.
  
If using a single use motor or Disposable Motor System, make sure to check that the delay on the ejection charge is correct using a simulation software (i.e. OpenRocket). If needed adjust the length of the delay grain. Then place the correct quantity of ejection propellant in the correct location. Cap it.
+
*Flight Safety. I will not launch my rocket at targets, into clouds, near airplanes, nor on trajectories that take it directly over the heads of spectators or beyond the boundaries of the launch site, and will not put any flammable or explosive payload in my rocket. I will not launch my rockets if wind speeds exceed 20 miles per hour. I will comply with Federal Aviation Administration airspace regulations when flying, and will ensure that my rocket will not exceed any applicable altitude limit in effect at that launch site.
  
Here is a great video to watch.
+
*Launch Site. I will launch my rocket outdoors, in an open area where trees, power lines, occupied buildings, and persons not involved in the launch do not present a hazard, and that is at least as large on its smallest dimension as one-half of the maximum altitude to which rockets are allowed to be flown at that site or 1500 feet, whichever is greater.
  
== Range Safety Check ==
+
*Recovery System. I will use a recovery system such as a parachute in my rocket so that all parts of my rocket return safely and undamaged and can be flown again, and I will use only flame-resistant or fireproof recovery system wadding in my rocket.
  
Is your paperwork in order?
+
*Recovery Safety. I will not attempt to recover my rocket from power lines, tall trees, or other dangerous places, fly it under conditions where it is likely to recover in spectator areas or outside the launch site, nor attempt to catch it as it approaches the ground.
  
=== Motors ===
+
= L1 Requirements =
  
Is the motor certified, what is the motor type and average thrust? Is the delay time is approximate for rocket?
+
[[File:Rocket_Launch_Pad_Group.jpg|thumb|600px|right|Four L1 certification rockets on the pad at SSI-R1 at Snow Ranch]]
  
Will the rocket penetrate cloud cover?
+
Sources of information: [http://www.tripoli.org/Level1 TRA L1 certification info] and [http://www.nar.org/high-power-rocketry-info/level-1-hpr-certification/ NAR L1 certification info].
  
Does your rocket motor have the ejection charge installed?
+
The following is a combination of the NAR and TRA requirements and rules.
  
Is sufficient wadding/Kevlar installed?
+
You must be at least 18 years old to be certified for Level 1. Although it is good practice to already be a member of NAR and/or TRA before certifying, in practice it is not enforced. Motors must be certified and non-experimental.
  
What kind of motor retention system is installed?
+
Your certifier (for NAR) needs to be either two people with the level you are attempting for, or one person with the level above the one you are attempting for. They must witness the flight.
  
What prevents the motor from flying-through the rocket?
+
=== Airframe ===
 +
The rocket must be built by the flyer.  The rocket shall have a display on the exterior identifying the calculated center of pressure.  The rocket must be of "conventional rocket design".  "Odd Rockets" including flying pyramids, saucers and flying spools will not be allowed for any certification flight.  The rocket may be either a kit or scratch built.  Scratch built rockets may contain commercially built components.
  
=== Rocket Construction ===
+
=== Recovery ===
 +
Standard parachute recovery is required.  Non-parachute recovery methods (e.g. tumble, helicopter, gliding, etc) are not permitted for certification flights.  If the rocket is using dual deployment, the first recovery event may be via a drogue-less or streamer as long as the main or second event uses a standard parachute.
  
Stability? Is the CG in front of the CP? Be able to identify both.
+
=== Motor ===
 +
The certification flight must be with a single certified H or I motor (tested total impulse between 160.01 and 640.00 n-sec).TRA does not allow staged and/or Clustered rockets for certification flights while NAR states you must use at least one HPR motor on your certification rocket. The flyer shall be observed by the certifying member or their designated representative during the assembly (if a reload or hybrid) and preparation of the motor. Single use motors are permitted.
  
Is the nose cone fitted correctly?
+
=== Electronics ===
 +
Electronics are not required for level 1 certification flights.
  
Launch lugs and/or rail guides properly installed, positioned, and aligned?
+
=== Pre-flight Inspection ===
 +
The model will be subjected to a safety inspection prior to flight. The safety inspection form is on the back of the NAR High Power Certification Application. During the safety inspection the modeler will be expected to provide oral answers to technical questions related to the safety and construction of their model. The questions may include (but not limited to) identification of the model’s center of gravity and center of pressure, methods used to determine model stability, and interpretation of the rocket motor’s designation. The certification team will initial (or check) the blocks indicating that model safety, motor certification, and the existence of a FAA waiver (if required) in effect were verified prior to flight.
  
Fins atttached securely and in a manner that will not cause an unsafe flight?
+
=== Certification Flight ===
 +
Level 1 Certification flight may take place at any insured launch. The certifying member (i.e. Prefect, TRA Director, NAR certifiers or TAP Member) must be present and witness the certification flight. The certifying member must witness the rocket ascend in a stable manner and descend in stabilized manner controlled by the recovery system.
  
Is an appropriately-sized recovery system installed and attached?
+
=== Post-Flight Inspection ===
 +
The rocket must be presented to the certifying member for inspection. If the rocket cannot be recovered, but can be inspected in place (power lines, tree, etc...) this is acceptable. The certifying member shall inspect the rocket for excessive damage. Excessive damage shall be considered damage to the point that if the flyer were handed another motor, the rocket could not be put on the pad and flown again safely. Damage caused by wind dragging will not cause a disqualification. If successful, the certifiers will sign the correct sheet to indicate that the certification attempt was successfully completed.
  
Are there vent holes?
+
=== Post-Post-Flight ===
 +
The certification sheets are returned to NAR or TRA Headquarters. No fees are required. The certification sheet must be returned by the certified individual or the event sponsors to NAR or TRA Headquarters to allow updating the NAR or TRA database. NAR sends an updated membership card showing the certification level upon receipt of the certification paperwork.
  
== Launch Pad Procedure ==
+
=== Non-certification ===
 +
Any of the following will result in non-certification for a certification flight:
 +
:*Motor Cato
 +
:*Excessive Damage
 +
:*No recovery system deployment or tangled recovery system deployment
 +
:*Rocket drifting outside the specified launch range
 +
:*Components coming down not attached to the recovery system.
 +
:*Any other violation of TRA safety code associated with this particular flight.
 +
:*Any other legitimate reason the certifying member deems merits non-certification
  
The rocket should slide freely on the rail. The pad angle should be within 20 degrees of the vertical axis (normal to the surface of the earth). Flight critical electronics (if there are any) should be armed before putting in igniters. Any radio control equipment should also be nominally operating before arming the igniters.
+
= Launch Locations =
  
=== How to install an igniter ===
+
=== Tripoli Central California ===
 +
Tripoli hosts launches on the third Saturday of each month. Details, calendar, updates, and directions, as well as other pertinent information, can be found on their website here[http://www.tccrockets.com].
 +
Be aware that Tripoli has slightly different policies and forms from NAR, as well as requiring a separate Tripoli membership in order to launch. However, certification levels from either are accepted at the other, i.e. if you are certified L1 through Tripoli, you can get your L2 certification at NAR, as long as you are a registered member of both.
  
Place in the nozzle of rocket, and tape the igniter to the rocket so it does not slide out. '''Make sure not to short the leads of the igniters. '''
+
[[File:Del_Norte_Launch_Site.jpg|thumb|frame|center|1000px|Del Norte launch site (TCC)]]
  
Here is a great video to watch.
+
=== Livermore Unit of the National Association of Rocketry ===
  
= Success and Failure =
+
LUNAR hosts launches on the first Saturday of each month - details can be found [http://www.lunar.org/ here].
  
Following the launch, the rocket will be inspected; should the airframe be deemed suitable for flight given a new motor, it will have passed L1 certification. Failed deployment, motor cato, drifting beyond a particular range (see launch officer), or the violation of other safety codes will result in a failure. L1 certification, however, is an excellent introduction to the basic operations of rockets and recovery! See [[Pegasus|Pegasus]] for a description of an L1 rocket used as a testbed for an L3 concept.
+
[[File:Snow_Ranch_Launch_Site.jpg|thumb|frame|center|1000px|Snow Ranch launch site (LUNAR)]]
  
 
= Final Steps =
 
= Final Steps =
  
== Mailing It In ==
+
=== Mailing It In ===
  
 
You must mail in your certification form to have the rocketry association acknowledge your achievement. These are the addresses of NAR and TRA.
 
You must mail in your certification form to have the rocketry association acknowledge your achievement. These are the addresses of NAR and TRA.
  
 +
National Association of Rocketry HQ <br/>
 +
P.O. Box 407 <br/>
 +
Marion, IA 52302<br/><br/>
 +
 +
Tripoli Rocketry Association, Inc.<br/>
 +
P.O. Box 87<br/>
 +
Bellevue, NE 6800<br/>
 +
 +
=== Clean Up ===
 +
 +
Make sure to wash off all the metal components of your rocket so they do not corrode from left over motor fuel.
  
 
[[Category: Rockets]]
 
[[Category: Rockets]]

Latest revision as of 00:20, 23 March 2016

Cameron Ramos before his L1 certification flight

In order to understand high power rocketry enough to launch and successfully recover an L1 rocket, please make sure you have already read HPR Background Information. Level 1 Certification allows flyers to fly High Power Rockets with a total installed impulse up to 640 newton-seconds.

Once you've read through this page, visit Launch Day for critical information on what to bring, wear, etc.

Safety Codes

NFPA 1127 and FAA 101

Note: Might be better to just give summaries of each relevant section and only post links to full documents. Someone please fix.

The National Fire Protection Association has multiple documents spanning different types of rocketry. Section 1122 governs model rockets and 1127 governs high powered rockets. We are most interested in 1127.

NFPA 1127 sets the rules and regulations for high power rocketry, including the motor classification system, rules for Range Safety Officers, and guidelines for the safe construction, use, and storage of rocket materials. Critically, it also includes the formal definition of High Power Rocketry, and it is this definition that is referenced in ITAR.

The Federal Aviation Administration Regulations also has a relevant section to the high powered rocketry community. FAA 101 Subpart C, Amateur Rockets. Here are the extremely relevant sections.

§101.22 Definitions.

The following definitions apply to this subpart:

(a) Class 1—Model Rocket means an amateur rocket that:
(1) Uses no more than 125 grams (4.4 ounces) of propellant;
(2) Uses a slow-burning propellant;
(3) Is made of paper, wood, or breakable plastic;
(4) Contains no substantial metal parts; and
(5) Weighs no more than 1,500 grams (53 ounces), including the propellant.
(b) Class 2—High-Power Rocket means an amateur rocket other than a model rocket that is propelled by a motor or motors having a combined total impulse of 40,960 Newton-seconds (9,208 pound-seconds) or less.
(c) Class 3—Advanced High-Power Rocket means an amateur rocket other than a model rocket or high-power rocket.
§101.23 General operating limitations.
(a) You must operate an amateur rocket in such a manner that it:
(1) Is launched on a suborbital trajectory;
(2) When launched, must not cross into the territory of a foreign country unless an agreement is in place between the United States and the country of concern;
(3) Is unmanned; and
(4) Does not create a hazard to persons, property, or other aircraft.
(b) The FAA may specify additional operating limitations necessary to ensure that air traffic is not adversely affected, and public safety is not jeopardized.
§101.25 Operating limitations for Class 2-High Power Rockets and Class 3-Advanced High Power Rockets.

When operating Class 2-High Power Rockets or Class 3-Advanced High Power Rockets, you must comply with the General Operating Limitations of §101.23. In addition, you must not operate Class 2-High Power Rockets or Class 3-Advanced High Power Rockets—

(a) At any altitude where clouds or obscuring phenomena of more than five-tenths coverage prevails;
(b) At any altitude where the horizontal visibility is less than five miles;
(c) Into any cloud;
(d) Between sunset and sunrise without prior authorization from the FAA;
(e) Within 9.26 kilometers (5 nautical miles) of any airport boundary without prior authorization from the FAA;
(f) In controlled airspace without prior authorization from the FAA;
(g) Unless you observe the greater of the following separation distances from any person or property that is not associated with the operations:
(1) Not less than one-quarter the maximum expected altitude;
(2) 457 meters (1,500 ft.);
(h) Unless a person at least eighteen years old is present, is charged with ensuring the safety of the operation, and has final approval authority for initiating high-power rocket flight; and
(i) Unless reasonable precautions are provided to report and control a fire caused by rocket activities.
§101.29 Information requirements.
(a) Class 2—High-Power Rockets. When a Class 2—High-Power Rocket requires a certificate of waiver or authorization, the person planning the operation must provide the information below on each type of rocket to the FAA at least 45 days before the proposed operation. The FAA may request additional information if necessary to ensure the proposed operations can be safely conducted. The information shall include for each type of Class 2 rocket expected to be flown:
(1) Estimated number of rockets,
(2) Type of propulsion (liquid or solid), fuel(s) and oxidizer(s),
(3) Description of the launcher(s) planned to be used, including any airborne platform(s),
(4) Description of recovery system,
(5) Highest altitude, above ground level, expected to be reached,
(6) Launch site latitude, longitude, and elevation, and
(7) Any additional safety procedures that will be followed.

TRA and NAR Codes

Useful documents:

For reference, here is a summary of NAR's safety code. For an non-edited version of NAR's code, check out the links above.

  • Certification. I will only fly high power rockets or possess high power rocket motors that are within the scope of my user certification and required licensing.
  • Materials. I will use only lightweight materials such as paper, wood, rubber, plastic, fiberglass, or when necessary ductile metal, for the construction of my rocket.
  • Motors. I will use only certified, commercially made rocket motors.
  • Ignition System. I will launch my rockets with an electrical launch system, and with electrical motor igniters that are installed in the motor only after my rocket is at the launch pad or in a designated prepping area. The electronics will have an off and on switch. They will turned off until my rocket is in the launching position.
  • Misfires. If my rocket does not launch when I press the button of my electrical launch system, I will remove the launcher’s safety interlock or disconnect its battery, and will wait 60 seconds after the last launch attempt before allowing anyone to approach the rocket.
  • Launch Safety. I will use a 5-second countdown before launch. I will ensure that a means is available to warn participants and spectators in the event of a problem. I will ensure that no person is closer to the launch pad than allowed by the accompanying Minimum Distance Table. I will check the stability of my rocket before flight and will not fly it if it cannot be determined to be stable.
  • Launcher. I will launch my rocket from a stable device that provides rigid guidance until the rocket has attained a speed that ensures a stable flight, and that is pointed to within 20 degrees of vertical. I will use a blast deflector to prevent the motor’s exhaust from hitting the ground.
  • Size. My rocket will not contain any combination of motors that total more than 40,960 N-sec of total impulse. My rocket will not weigh more at liftoff than one-third of the certified average thrust of the high power rocket motor(s) intended to be ignited at launch.
  • Flight Safety. I will not launch my rocket at targets, into clouds, near airplanes, nor on trajectories that take it directly over the heads of spectators or beyond the boundaries of the launch site, and will not put any flammable or explosive payload in my rocket. I will not launch my rockets if wind speeds exceed 20 miles per hour. I will comply with Federal Aviation Administration airspace regulations when flying, and will ensure that my rocket will not exceed any applicable altitude limit in effect at that launch site.
  • Launch Site. I will launch my rocket outdoors, in an open area where trees, power lines, occupied buildings, and persons not involved in the launch do not present a hazard, and that is at least as large on its smallest dimension as one-half of the maximum altitude to which rockets are allowed to be flown at that site or 1500 feet, whichever is greater.
  • Recovery System. I will use a recovery system such as a parachute in my rocket so that all parts of my rocket return safely and undamaged and can be flown again, and I will use only flame-resistant or fireproof recovery system wadding in my rocket.
  • Recovery Safety. I will not attempt to recover my rocket from power lines, tall trees, or other dangerous places, fly it under conditions where it is likely to recover in spectator areas or outside the launch site, nor attempt to catch it as it approaches the ground.

L1 Requirements

Four L1 certification rockets on the pad at SSI-R1 at Snow Ranch

Sources of information: TRA L1 certification info and NAR L1 certification info.

The following is a combination of the NAR and TRA requirements and rules.

You must be at least 18 years old to be certified for Level 1. Although it is good practice to already be a member of NAR and/or TRA before certifying, in practice it is not enforced. Motors must be certified and non-experimental.

Your certifier (for NAR) needs to be either two people with the level you are attempting for, or one person with the level above the one you are attempting for. They must witness the flight.

Airframe

The rocket must be built by the flyer. The rocket shall have a display on the exterior identifying the calculated center of pressure. The rocket must be of "conventional rocket design". "Odd Rockets" including flying pyramids, saucers and flying spools will not be allowed for any certification flight. The rocket may be either a kit or scratch built. Scratch built rockets may contain commercially built components.

Recovery

Standard parachute recovery is required. Non-parachute recovery methods (e.g. tumble, helicopter, gliding, etc) are not permitted for certification flights. If the rocket is using dual deployment, the first recovery event may be via a drogue-less or streamer as long as the main or second event uses a standard parachute.

Motor

The certification flight must be with a single certified H or I motor (tested total impulse between 160.01 and 640.00 n-sec).TRA does not allow staged and/or Clustered rockets for certification flights while NAR states you must use at least one HPR motor on your certification rocket. The flyer shall be observed by the certifying member or their designated representative during the assembly (if a reload or hybrid) and preparation of the motor. Single use motors are permitted.

Electronics

Electronics are not required for level 1 certification flights.

Pre-flight Inspection

The model will be subjected to a safety inspection prior to flight. The safety inspection form is on the back of the NAR High Power Certification Application. During the safety inspection the modeler will be expected to provide oral answers to technical questions related to the safety and construction of their model. The questions may include (but not limited to) identification of the model’s center of gravity and center of pressure, methods used to determine model stability, and interpretation of the rocket motor’s designation. The certification team will initial (or check) the blocks indicating that model safety, motor certification, and the existence of a FAA waiver (if required) in effect were verified prior to flight.

Certification Flight

Level 1 Certification flight may take place at any insured launch. The certifying member (i.e. Prefect, TRA Director, NAR certifiers or TAP Member) must be present and witness the certification flight. The certifying member must witness the rocket ascend in a stable manner and descend in stabilized manner controlled by the recovery system.

Post-Flight Inspection

The rocket must be presented to the certifying member for inspection. If the rocket cannot be recovered, but can be inspected in place (power lines, tree, etc...) this is acceptable. The certifying member shall inspect the rocket for excessive damage. Excessive damage shall be considered damage to the point that if the flyer were handed another motor, the rocket could not be put on the pad and flown again safely. Damage caused by wind dragging will not cause a disqualification. If successful, the certifiers will sign the correct sheet to indicate that the certification attempt was successfully completed.

Post-Post-Flight

The certification sheets are returned to NAR or TRA Headquarters. No fees are required. The certification sheet must be returned by the certified individual or the event sponsors to NAR or TRA Headquarters to allow updating the NAR or TRA database. NAR sends an updated membership card showing the certification level upon receipt of the certification paperwork.

Non-certification

Any of the following will result in non-certification for a certification flight:

  • Motor Cato
  • Excessive Damage
  • No recovery system deployment or tangled recovery system deployment
  • Rocket drifting outside the specified launch range
  • Components coming down not attached to the recovery system.
  • Any other violation of TRA safety code associated with this particular flight.
  • Any other legitimate reason the certifying member deems merits non-certification

Launch Locations

Tripoli Central California

Tripoli hosts launches on the third Saturday of each month. Details, calendar, updates, and directions, as well as other pertinent information, can be found on their website here[1]. Be aware that Tripoli has slightly different policies and forms from NAR, as well as requiring a separate Tripoli membership in order to launch. However, certification levels from either are accepted at the other, i.e. if you are certified L1 through Tripoli, you can get your L2 certification at NAR, as long as you are a registered member of both.

Del Norte launch site (TCC)

Livermore Unit of the National Association of Rocketry

LUNAR hosts launches on the first Saturday of each month - details can be found here.

Snow Ranch launch site (LUNAR)

Final Steps

Mailing It In

You must mail in your certification form to have the rocketry association acknowledge your achievement. These are the addresses of NAR and TRA.

National Association of Rocketry HQ
P.O. Box 407
Marion, IA 52302

Tripoli Rocketry Association, Inc.
P.O. Box 87
Bellevue, NE 6800

Clean Up

Make sure to wash off all the metal components of your rocket so they do not corrode from left over motor fuel.