Difference between revisions of "L1 Certification"

From Stanford SSI Wiki
Jump to navigation Jump to search
(→‎Range Safety Check: Updated with relevant info)
(→‎Rocket Construction: updated to reflect necessary info)
Line 36: Line 36:
  
 
=== Rocket Construction ===
 
=== Rocket Construction ===
 +
 +
Stability? Is the CG in front of the CP? Be able to identify both.
 +
 +
Is the nose cone fitted correctly?
 +
 +
Launch lugs and/or rail guides properly installed, positioned, and aligned?
 +
 +
Fins atttached securely and in a manner that will not cause an unsafe flight?
 +
 +
Is an appropriately-sized recovery system installed and attached?
 +
 +
Are there vent holes?
  
 
== Launch Pad Procedure ==
 
== Launch Pad Procedure ==

Revision as of 07:29, 26 January 2016

In order to understand high power rocketry enough to launch and successfully recover an L1 rocket, you must read, live, and understand the following information.


L1 Requirements

L1 rocket certification allows individuals to launch rockets with an impulse up to 640 Ns. The requirements include:

  • The airframe must be built by the user with external markings for the centers of gravity and pressure. Rocket kits may be used.
  • A standard parachute must be used for recovery, even if a dual-deployment method is used.
  • An H or I motor may be used (with impulse < 640 Ns).
  • No electronics or altimeter is required.

Launch Day Procedures

Packing Your Parachute

Prepping Your Motor

Range Safety Check

Is your paperwork in order?

Motors

Is the motor certified, what is the motor type and average thrust? Is the delay time is approximate for rocket?

Will the rocket penetrate cloud cover?

Does your rocket motor have the ejection charge installed?

Is sufficient wadding/Kevlar installed?

What kind of motor retention system is installed?

What prevents the motor from flying-through the rocket?

Rocket Construction

Stability? Is the CG in front of the CP? Be able to identify both.

Is the nose cone fitted correctly?

Launch lugs and/or rail guides properly installed, positioned, and aligned?

Fins atttached securely and in a manner that will not cause an unsafe flight?

Is an appropriately-sized recovery system installed and attached?

Are there vent holes?

Launch Pad Procedure

Success and Failure

Following the launch, the rocket will be inspected; should the airframe be deemed suitable for flight given a new motor, it will have passed L1 certification. Failed deployment, motor cato, drifting beyond a particular range (see launch officer), or the violation of other safety codes will result in a failure. L1 certification, however, is an excellent introduction to the basic operations of rockets and recovery! See Pegasus for a description of an L1 rocket used as a testbed for an L3 concept.

Mailing It In