303
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: + + + −
added check integrity
The model size tolerance is an important consideration when importing CAD files into Pointwise. We recommend adjusting the model size tolerance to within about an order of magnitude of the largest spatial dimension of the geometry. This parameter is found in the File menu under Properties. Setting the appropriate model size tolerance helps Pointwise's geometry kernel interpret and process the geometric information with the highest possible degree of accuracy. In order to maintain maximum integrity, this step must be performed prior to importing the geometry. If you do not know the actual model size, import the geometry using the default model size tolerance, record the value from the File, Properties panel, undo the import, set the appropriate model size tolerance and re-import the CAD file.
The model size tolerance is an important consideration when importing CAD files into Pointwise. We recommend adjusting the model size tolerance to within about an order of magnitude of the largest spatial dimension of the geometry. This parameter is found in the File menu under Properties. Setting the appropriate model size tolerance helps Pointwise's geometry kernel interpret and process the geometric information with the highest possible degree of accuracy. In order to maintain maximum integrity, this step must be performed prior to importing the geometry. If you do not know the actual model size, import the geometry using the default model size tolerance, record the value from the File, Properties panel, undo the import, set the appropriate model size tolerance and re-import the CAD file.
=Check Integrity of Solid Model=
Pointwise can import the solid model and exploit the information it contains about how the surfaces are stitched together. Even when using native CAD files, it is a good idea to check to see if the solid model is watertight. This is carried out in the Create, Assemble, Models panel by selecting the model and clicking Assemble. If the solid model is watertight, there should be a single model (all surfaces green) and zero lamina boundaries (red edges). If the solid model is not watertight, the tolerance can be increased to automatically close the gaps.
=Sources=
=Sources=
[http://www.pointwise.com/theconnector/July-2012/CAD-to-CFD-in-5-Minutes.shtml Adapted from ''From CAD to CFD in Five Minutes: The Complete Story of Meshing a Real Geometry Using Pointwise'']
[http://www.pointwise.com/theconnector/July-2012/CAD-to-CFD-in-5-Minutes.shtml Adapted from ''From CAD to CFD in Five Minutes: The Complete Story of Meshing a Real Geometry Using Pointwise'']
[[Category: Rockets]]
[[Category: Rockets]]
[[Category:CFD]]
[[Category:CFD]]