767
edits
Changes
Reclassified under Category:Avionics
# Enable internet sharing by navigating to System Preferences >> Sharing and turn Internet Sharing on for your Thunderbolt or USB ethernet connection.
# Enable internet sharing by navigating to System Preferences >> Sharing and turn Internet Sharing on for your Thunderbolt or USB ethernet connection.
# Plug in the wall power adapter into the Raspberry Pi, and then plug it into the wall to turn the power on. The Raspberry Pi will take a minute to boot up.
# Plug in the wall power adapter into the Raspberry Pi, and then plug it into the wall to turn the power on. The Raspberry Pi will take a minute to boot up.
# Open terminal and SSH to the Pi with <code> ssh pi@raspberrypi.local</code>. If you're getting a host or timeout error, the Pi probably hasn't finished booting up yet. If all lights on the Pi are flashing indicating a full boot up but you're still not able to SSH, make sure SSH is enabled and type in <code>arp -a</code> to view your network cache. The Pi should appear as a <code>198.162.-.-</code> IP address.
# Open terminal and SSH to the Pi with <code> ssh pi@raspberrypi.local</code>. If you're getting a host or timeout error, the Pi probably hasn't finished booting up yet. If all lights on the Pi are flashing indicating a full boot up but you're still not able to SSH, make sure SSH is enabled and type in <code>arp -a</code> to view your network cache. The Pi should appear as a <code>198.162.-.-</code> IP address. Try using this IP to connect with <code>ssh pi@<IP ADDRESS></code>
# You’ll be prompted to verify you’re trying to login to the Raspberry Pi. Type “yes” and press return. Type the password, which is “raspberry” and press return. Boom! You’re logged into your Raspberry Pi.
# You’ll be prompted to verify you’re trying to login to the Raspberry Pi. Type “yes” and press return. Type the password, which is “raspberry” and press return. Boom! You’re logged into your Raspberry Pi.
== Setting up VNC == <!--T:7-->
== Setting up VNC == <!--T:7-->
# We now need to run the VNC Server, so enter the following command into your SSH window: <code> vncserver :1</code>. If you haven't downloaded the VNC server application, follow step 2 of Getting Started. If you're using Windows, I can't guarantee that the <code> tightvncserver</code> will download over your SSH connection.
# We now need to run the VNC Server, so enter the following command into your SSH window: <code> vncserver :1</code>. If you haven't downloaded the VNC server application, follow step 2 of Getting Started. If you're using Windows, I can't guarantee that <code> tightvncserver</code> will download over your SSH connection. You may need to connect the Pi to an external monitor/keyboard/mouse to install the application.
# If this is the first time you've started the VNC server, you will be prompted to enter and confirm a password. It would make sense to use “raspberry” for this, but passwords are limited to 8 characters, so I use “raspberr”. Note that this is the password that you will need to use to connect to the Raspberry Pi remotely. You will also be asked if you want to create a separate “read-only” password – say no.
# If this is the first time you've started the VNC server, you will be prompted to enter and confirm a password. It would make sense to use “raspberry” for this, but passwords are limited to 8 characters, so I use “raspberr”. Note that this is the password that you will need to use to connect to the Raspberry Pi remotely. You will also be asked if you want to create a separate “read-only” password – say no.
# The VNC server is now running and so we can attempt to connect to it, but first we must switch to the computer from which we want to control the Pi and setup a VNC client to connect to the Pi. Open the VNC viewer you downloaded earlier and enter <code>raspberrypi.local:1</code> for the VNC Server. Leave the Encryption at the default setting and click Connect. Ignore the warning and enter the password you created earlier ("raspberr").
# The VNC server is now running! We can attempt to connect to it, but first we must switch to the computer from which we want to control the Pi. Open the VNC viewer you downloaded earlier and enter <code>raspberrypi.local:1</code> for the VNC Server. Leave the Encryption at the default setting and click Connect. Ignore the warning and enter the password you created earlier ("raspberr").
# The VNC window itself should appear. You're all set!
# The VNC window itself should appear. You're all set!
[[Category:Avionics]]
[[Category:Avionics]]