Changes

Line 38: Line 38:  
To the left of the DUT Fixture, one can find the HONEY Pin Out. This faithfully replicates the HONEY power, data, and CAN buses to the exact pin number of each pin, but with standard pitch to allow for using jumper cables. That is, the entire 4x30 data bus, which is normally 2.00mm PC/104+, is now available in 4x30 2.54mm standard headers. You can use this as a faithful reference to see the exact pin mapping of the actual HONEY data bus, and to probe and scope specific lines, as well as use this pinout in conjunction with the breadboard to develop and testing a new project.
 
To the left of the DUT Fixture, one can find the HONEY Pin Out. This faithfully replicates the HONEY power, data, and CAN buses to the exact pin number of each pin, but with standard pitch to allow for using jumper cables. That is, the entire 4x30 data bus, which is normally 2.00mm PC/104+, is now available in 4x30 2.54mm standard headers. You can use this as a faithful reference to see the exact pin mapping of the actual HONEY data bus, and to probe and scope specific lines, as well as use this pinout in conjunction with the breadboard to develop and testing a new project.
   −
The Power Bus, Data Bus, and CAN Bus are all found separately here, just as they would in an actual HONEY flight stack, and follow the same pinout.  
+
The Power Bus, Data Bus, and CAN Bus are all found separately here, just as they would in an actual HONEY flight stack, and follow the same pinout.
 +
 
 +
[[File:QueenBee2.jpg | right| thumb | <center> QueenBee on boot-up </center>]]
 +
[[File:QueenBee-SW.jpg | right| thumb | <center> QueenBee main screen </center>]]
 +
[[File:QueenBee-routing.png | right| thumb | <center> QueenBee routing job </center>]]
    
=== Venom Breakout ===
 
=== Venom Breakout ===