Changes

1) '''Transmit/receive [[OpComms System IV|node]].''' Ensure that the laser, photodetector, control board, and BNC connection between sensor and board are all present. <br>

1) '''Transmit/receive [[OpComms System IV|node]].''' Ensure that the laser, photodetector, control board, and BNC connection between sensor and board are all present. <br>

2) '''Tripod.''' Make sure the tripod matches the node you have chosen. The Rosencrantz tripod has a round plate with a hole in the center; the Guildenstern tripod has a large tri-lobed plate that is continuous. <br>

2) '''Tripod.''' Make sure the tripod matches the node you have chosen. The Rosencrantz tripod has a round plate with a hole in the center; the Guildenstern tripod has a large tri-lobed plate that is continuous. <br>

3) '''Laptop.''' Ensure your code is up to date by pulling from the OpComms Github repository. <br>

3) '''Laptop.''' Ensure your code is up to date by pulling from the opcomms and opcomms-embedded Github repositories. <br>

4) '''Keysight oscilloscope.''' Have Sasha or Elizabeth unlock an oscilloscope from the toolbox. Guard it with your life. <br>

4) '''Keysight oscilloscope.''' Have Sasha or Elizabeth unlock an oscilloscope from the toolbox. Guard it with your life. <br>

5) '''Test bin.''' Must contain toolbox, extension cords, power supplies, and motorized alt/az mount. Use a dry-erase marker to complete the Test Checklist posted on the lid of the bin. If all of the contents are present you may proceed <br>

5) '''Test bin.''' Must contain toolbox, extension cords, power supplies, and motorized alt/az mount. Use a dry-erase marker to complete the Test Checklist posted on the lid of the bin. If all of the contents are present you may proceed <br>