Changes

Jump to navigation Jump to search
1,396 bytes added ,  20:40, 18 August 2017
Created page with "The '''Fang Breakout''' is the secondary variety of breakout for the HONEY flight stack. It was introduced in the development of the HONEY Gen 1 Breakout, Viper. As of time of..."
The '''Fang Breakout''' is the secondary variety of breakout for the HONEY flight stack. It was introduced in the development of the HONEY Gen 1 Breakout, Viper. As of time of writing (Aug 10, 2017), it has no impending implementation scheme. It exists in the first revision of the HAB Breakout to facilitate two things -- one, the possible eventual need to break out the additional remaining pins, and, more importantly, two -- to enable directly using female jumper wires to tap signals directly from Viper, by providing a standard-pitch connector that can be both directly tapped or cabled.

The connector and associated cabling are:
Connector: [https://www.samtec.com/products/tst-128-05-t-d-ra Samtec TST-156-01-F-D-RA]
Cabling: [https://www.samtec.com/products/hcsd HCSD-28-D-XX.XX-01-S-N-G]

The Fang Breakout pinout is very similar to the Venom Breakout, with some slight alterations:

{| class="wikitable"
|-
|5V
|3.3V BUS
|VBATT (4.2V)
|12V
|1.8V
|SDA
|SCL
|MOSI
|MISO
|SCLK
|VA_PWM
|CHIRP
|R_MCU
|R_ALL
|S_READY
|LOW_PWR
|FMODE
|SYS_F3
|SYS_F4
|SYS_F5
|SYS_F6
|CAN2_H
|CAN2_L
|(+5 S)
|(-5 S)
|(+12 S)
|(-12 S)
|GND
|-
|5V
|3.3V BUS
|VBATT (4.2V)
|12V
|VADJ OUT
|TX4
|RX4
|TX6
|RX6
|DAC0
|DAC1
|AV29
|AV42
|AV17
|AV16
|AV35
|AV36
|AV37
|AV38
|AVA10
|AV51
|AV52
|AV53
|CAN1_H
|CAN1_L
|CAN_SPD
|3.3V CAN
|GND
|}

[[Category: High Altitude Balloons]][[Category: HABEES]][[Category: HONEY]]

Navigation menu