700
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: + + + + + + + + + + + + + + + + + +
Balloons Gen 1 ProtoBoard (view source)
Revision as of 22:22, 23 August 2017
, 22:22, 23 August 2017→Breadboard
The selection-header is 6 pins wide. The second pin from each end connects directly to the power rail. The first and third pins from each end are a particular voltage. Therefore, to select a voltage, you must jump together either the: 1st & 2nd pins, 2nd & 3rd pins, 4th & 5th pins, or 5th & 6th pins. '''Be careful not to accidentally jump the 3rd & 4th pins -- which can permanently damage the HONEY BMS.'''
The selection-header is 6 pins wide. The second pin from each end connects directly to the power rail. The first and third pins from each end are a particular voltage. Therefore, to select a voltage, you must jump together either the: 1st & 2nd pins, 2nd & 3rd pins, 4th & 5th pins, or 5th & 6th pins. '''Be careful not to accidentally jump the 3rd & 4th pins -- which can permanently damage the HONEY BMS.'''
In chart form, this is:
{|
|-
|5V
|L RAIL
|3.3V
|12V
|L RAIL
|4.2V
|
|4.2V
|R RAIL
|12V
|3.3V
|R RAIL
|5V
|}
''It is worth noting that the headers for the left & right power rails are mirrored.''
''It is worth noting that the headers for the left & right power rails are mirrored.''