39
edits
Changes
Jump to navigation
Jump to search
mLine 20:
Line 20: − + − + − + − + − +
no edit summary
3. For basic spin coating:
3. For basic spin coating:
a. Press Recipe
a. Press Recipe
b. Press 3: This is the recipe that we'll be using for SSI. A recipe has from 1 to 9 steps, each with a different length and RPM. For basic use, only change the first step of recipe 3.
b. Press 3: This is the recipe that we'll be using for SSI. A recipe has from 1 to 9 steps, each with a different length and RPM. For basic use, only change the first step of recipe 3.
c. Press Step, then 1 on the keypad (to change the first step)
c. Press Step, then 1 on the keypad (to change the first step)
d. Press Step terminate and set the duration with the number pad. Then press enter.
d. Press Step terminate and set the duration with the number pad. Then press enter.
e. Press Speed and set RPMs with the number pad. Then press enter.
e. Press Speed and set RPMs with the number pad. Then press enter.
4. Center your slide in the bowl, pipet a droplet of liquid onto the center of the substrate and close the lid. If the slide is too heavy or too off-center it'll fall off and the machine will make a high pitched noise. This isn't a big problem, just recenter and try again.
4. Center your slide in the bowl, pipet a droplet of liquid onto the center of the substrate and close the lid. If the slide is too heavy or too off-center it'll fall off and the machine will make a high pitched noise. This isn't a big problem, just recenter and try again.