Search results

Page title matches

• Gen 2 Avionics
  76 bytes (7 words) - 23:40, 1 February 2016
• Gen 2 Architecture
  * 2-Boards (Base Stack): 51mm spacing, 60mm fixture bolt. (McMaster 94669A127, * 4-Boards (Base + 2 FTC): 16mm spacing, 30/25mm fixture bolt. (McMaster 94669A111, 92005A132, 9
  25 KB (4,218 words) - 22:41, 31 August 2017
• Balloon Gen 2 BMS
  245 bytes (26 words) - 23:22, 15 August 2017
• Balloon Gen 2 Avionics
  252 bytes (28 words) - 23:13, 23 August 2017
• Gen 2 Architecture Rev1
  Changes to the HONEY Architecture were made with Avionics Gen 5 and BMS Gen 3, which split the data bus into two in order to reduce routing complexity. ...ck power bus, a 4-pin (2x2) connector for the flight stack CAN bus, and an 2 pin (2x2) connector (NON stack through) for holding jumpers for implementin
  21 KB (3,473 words) - 00:32, 12 August 2018

Page text matches

• HONEY
  #REDIRECT [[Gen 2 Architecture Rev1]]
  37 bytes (4 words) - 00:45, 12 August 2018
• Gen 1 Architecture
  | header = Gen 1 Architecture ...g of 2017, when it was replaced by [[Gen 2 Architecture | HONEY]], the Gen 2 Architecture.
  6 KB (940 words) - 23:17, 23 August 2017
• Balloons Gen 5 Avionics
  ...Platform. It implements most of the functionality that exists in Gen 4 rev 2 Avionics, but the architecture of the boards has been changed, and function Several changes were made from Rev 4.2 in order to reduce the complexity:<br/>
  5 KB (684 words) - 05:36, 15 July 2018
• Venom Breakout
  ...e power bus, and the primary CAN bus. It is implemented by a 1.27mm-pitch, 2-row connector, and is consequently also utilized using a set of 1.27mm-pitc The Venom Breakout was first introduced with the introduction of Viper, the Gen 1 HONEY breakout, which chose this format and pin-out as the standard break
  2 KB (306 words) - 20:32, 18 August 2017
• Balloons Gen 3 BMS
  ...g a separate power path for expansion boards. It is compliant with the Gen 2 Architecture.<br/>
  2 KB (228 words) - 05:29, 15 July 2018
• STINGR Gesture Specification I
  |The Count (Gen 4 Avionics) |Biscuit (Gen 2 BMS)
  11 KB (1,773 words) - 07:39, 18 September 2017
• SSI-20
  [[File:ssi201.jpg | left | thumb | <center> SSI-20 Gen 2 Avionics </center>]] The SSI-20 payload used SSI's older Gen 2 Avionics with an added circuit for ballast deployment controls. The payload
  6 KB (894 words) - 05:56, 18 October 2015
• Gen 1 Software
  Message ID (2 bit) Message ID (2 bit)
  28 KB (4,239 words) - 23:19, 15 August 2017
• VB Gen 8.1 Avionics
  '''The ValBal Gen 8.1 Avionics''' is the eighth generation and twelfth iteration of of the Va ...cro-controller onboard the ValBal v8.1 Radio Board is an embedded Teensy 3.2 (identical to the Mainboard except it uses 0603 sized components instead of
  11 KB (1,641 words) - 03:51, 10 September 2017
• Balloon Gen 1 Avionics
  The '''Balloons Gen 1 Avionics Platform''' is the first core avionics suite developed by HABEES * Teensy 3.2 Main MCU
  15 KB (2,381 words) - 22:45, 23 August 2017
• Gen 2 Architecture Rev1
  Changes to the HONEY Architecture were made with Avionics Gen 5 and BMS Gen 3, which split the data bus into two in order to reduce routing complexity. ...ck power bus, a 4-pin (2x2) connector for the flight stack CAN bus, and an 2 pin (2x2) connector (NON stack through) for holding jumpers for implementin
  21 KB (3,473 words) - 00:32, 12 August 2018
• Project SPACE
  ...profound drawback was its weight -- the total payload weighed in at around 2.5 kilograms. Unfortunately, SPACE Mk 1 flew on a balloon with a failed para A renewed emphasis on weight reduction led to the creation of SPACE Mk 2 - ''SPACE Micro''. This version of SPACE was dramatically smaller and less
  7 KB (1,225 words) - 23:11, 12 February 2016
• Balloons Gen 1 TestBench
  * Teensy 3.2 Socket + microSD logger + Pin Out ...4x30 data bus, which is normally 2.00mm PC/104+, is now available in 4x30 2.54mm standard headers. You can use this as a faithful reference to see the
  9 KB (1,621 words) - 21:15, 28 September 2017
• HONEY Getting Started
  If you didn't answer 2 or 3 with '''YES''', then that's still OK! Projects are always a work in pr ...mplates. In there, you will find a folder called '''HONEY Board Template - 2 Layer'''. '''DO NOT, UNDER ANY CIRCUMSTANCES, OPEN THIS PROJECT AND BEGIN W
  19 KB (3,375 words) - 23:21, 15 August 2017
• Gen 2 Architecture
  * 2-Boards (Base Stack): 51mm spacing, 60mm fixture bolt. (McMaster 94669A127, * 4-Boards (Base + 2 FTC): 16mm spacing, 30/25mm fixture bolt. (McMaster 94669A111, 92005A132, 9
  25 KB (4,218 words) - 22:41, 31 August 2017