Changes

Jump to navigation Jump to search
no edit summary
Line 50: Line 50:  
* We're here to help you! Ask us if you have any questions.
 
* We're here to help you! Ask us if you have any questions.
 
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.  
 
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.  
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. Since we're working remotely this quarter, it'll be difficult to send replacement parts.
+
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.  
 
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.  
 
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.  
  
17

edits

Navigation menu