Changes

Jump to navigation Jump to search
Line 51: Line 51:  
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.  
 
* When working with LEDs, make sure to add a resistor to avoid frying the LEDs.  
 
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.   
 
* When working with the Feather, make sure to ''' never connect any of the ground pins to the 3.3 V pins '''. This could damage the board, and we may be unable to replace the board.   
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.  
+
* '''Disconnect the Feather from its battery and micro USB connection when rewiring anything on the breadboard.''' This makes it less likely to accidentally connect the GND and 3.3 V pins and cause a short, which could damage your board.
 +
* '''Always double check your connections before connecting the Feather to a micro USB cable or to the Feather battery. '''
    
== Module 1: Intro ==  
 
== Module 1: Intro ==  
17

edits

Navigation menu