Difference between revisions of "HONEY Standardized Connectors"
| (16 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{HONEY-sidebar | ||
| + | | header = HONEY Standards | ||
| + | | img link = File:HONEY2.jpg | ||
| + | }} | ||
| + | |||
This page lists all of the connectors used on various boards, as well as standardized HONEY connectors and their use cases. HONEY uses primarily (and almost exclusively) Samtec connectors -- and only uses other connectors when no available Samtec connector fills the use case. | This page lists all of the connectors used on various boards, as well as standardized HONEY connectors and their use cases. HONEY uses primarily (and almost exclusively) Samtec connectors -- and only uses other connectors when no available Samtec connector fills the use case. | ||
| Line 7: | Line 12: | ||
The below are used for all HONEY Teensy 3.2 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into four portions -- the internal 2x7 row of pins that are SMD on the bottom of the teensy (herein referred to as "internal row"), the two 14-pin side rows, the back 5-pin row, and the remaining 3 side pins (A10/A11/AREF). The below is broken into the socket connectors, and the male teensy-side connectors. | The below are used for all HONEY Teensy 3.2 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into four portions -- the internal 2x7 row of pins that are SMD on the bottom of the teensy (herein referred to as "internal row"), the two 14-pin side rows, the back 5-pin row, and the remaining 3 side pins (A10/A11/AREF). The below is broken into the socket connectors, and the male teensy-side connectors. | ||
| − | '''Sockets (PCB Side)''' | + | '''Sockets (PCB Side)'''<br /> |
| − | Internal Row (1) -- SLW-107-01-G-D | + | Internal Row (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-107-01-G-D]<br /> |
| − | Side Rows (2) -- SLW-114-01-G-S | + | Side Rows (2) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-114-01-G-S]<br /> |
| − | Back Row (1) -- SLW-105-01-G-S | + | Back Row (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-105-01-G-S]<br /> |
| − | A10/A11/AREF Row (1) -- SLW-103-01-G-S | + | A10/A11/AREF Row (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-103-01-G-S]<br /> |
| − | '''Headers (Teensy Side)''' | + | '''Headers (Teensy Side)'''<br /> |
| − | Internal Row (1) -- TSM-107-04-T-DV | + | Internal Row (1) -- [http://suddendocs.samtec.com/catalog_english/tsm.pdf TSM-107-04-T-DV]<br /> |
| − | Side Rows (2) -- TSW-114-06-G-S | + | Side Rows (2) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-114-06-G-S]<br /> |
| − | Back Row (1) -- TSW-105-06-G-S | + | Back Row (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-105-06-G-S]<br /> |
| − | A10/A11/AREF Row (1) -- TSW-103-06-G-S | + | A10/A11/AREF Row (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-103-06-G-S]<br /> |
===Teensy 3.6 Socket + Mating Pins=== | ===Teensy 3.6 Socket + Mating Pins=== | ||
The below are used for all HONEY Teensy 3.6 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into five portions -- three sets of internal rows, that are SMD on the bottom of the Teensy; the furthest back one is referred to as Internal Row 1, the middle one is Internal Row 2, and the furthest up is Internal Row 3. Additionally, there are the two side rows, and the remaining A10/A11/AREF row. The below is broken into the socket connectors, and the male teensy-side connectors. | The below are used for all HONEY Teensy 3.6 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into five portions -- three sets of internal rows, that are SMD on the bottom of the Teensy; the furthest back one is referred to as Internal Row 1, the middle one is Internal Row 2, and the furthest up is Internal Row 3. Additionally, there are the two side rows, and the remaining A10/A11/AREF row. The below is broken into the socket connectors, and the male teensy-side connectors. | ||
| − | '''Sockets (PCB Side)''' | + | '''Sockets (PCB Side)'''<br /> |
| − | Internal Row 1 (1) -- SLW-105-01-G-D | + | Internal Row 1 (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-105-01-G-D]<br /> |
| − | Internal Row 2 (2) -- SLW-103-01-G-D | + | Internal Row 2 (2) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-103-01-G-D]<br /> |
| − | Internal Row 3 (1) -- SLW-104-01-G-D | + | Internal Row 3 (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-104-01-G-D]<br /> |
| − | Side Rows (2) -- SLW-124-01-G-S | + | Side Rows (2) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-124-01-G-S]<br /> |
| − | A10/A11/AREF Row (1) -- SLW-103-01-G-S | + | A10/A11/AREF Row (1) -- [http://suddendocs.samtec.com/catalog_english/slw.pdf SLW-103-01-G-S]<br /> |
| − | '''Headers (Teensy Side)''' | + | '''Headers (Teensy Side)'''<br /> |
| − | Internal Row 1 (1) -- TSM-105-04-T-DV | + | Internal Row 1 (1) -- [http://suddendocs.samtec.com/catalog_english/tsm.pdf TSM-105-04-T-DV]<br /> |
| − | Internal Row 2 (2) -- TSM-103-04-T-DV | + | Internal Row 2 (2) -- [http://suddendocs.samtec.com/catalog_english/tsm.pdf TSM-103-04-T-DV]<br /> |
| − | Internal Row 3 (1) -- TSM-104-04-T-DV | + | Internal Row 3 (1) -- [http://suddendocs.samtec.com/catalog_english/tsm.pdf TSM-104-04-T-DV]<br /> |
| − | Side Rows (2) -- TSW-124-06-G-S | + | Side Rows (2) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-124-06-G-S]<br /> |
| − | A10/A11/AREF Row (1) -- TSW-103-06-G-S | + | A10/A11/AREF Row (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-103-06-G-S]<br /> |
===HONEY Stack Connectors=== | ===HONEY Stack Connectors=== | ||
| − | Databus (stackthrough) (1) -- PTHF-130-02-G-Q-368<br /> | + | Databus (stackthrough) (1) -- [http://suddendocs.samtec.com/catalog_english/pthf.pdf PTHF-130-02-G-Q-368]<br /> |
| − | Databus (non-stackthrough (?) -- PTHF-130-03-G-Q-368<br /> | + | Databus (non-stackthrough (?) -- [http://suddendocs.samtec.com/catalog_english/pthf.pdf PTHF-130-03-G-Q-368]<br /> |
| − | Powerbus (stackthrough) (1) -- ESQ-105- | + | Powerbus (stackthrough) (1) -- [http://suddendocs.samtec.com/catalog_english/esq_th.pdf ESQ-105-39-G-D-LL]<br /> |
| − | CANbus (stackthrough) (1) -- ESQ-103- | + | CANbus (stackthrough) (1) -- [http://suddendocs.samtec.com/catalog_english/esq_th.pdf ESQ-103-39-G-D-LL]<br /> |
| − | Terminator Holder (1) -- TSW-104-07-G-D<br /> | + | Terminator Holder (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-104-07-G-D]<br /> |
| − | Shunt (2) -- SNT-100-BK-T<br /> | + | Shunt (2) -- [http://suddendocs.samtec.com/catalog_english/snt.pdf SNT-100-BK-T]<br /> |
| − | + | ==HONEY Breakouts== | |
| − | ==Venom Breakout== | + | ===Venom Breakout=== |
The Venom Breakout is the HONEY-standard 50-pin 1.27mm pitch connector/cabling that provides primary data & power connections over cabling between HONEY stacks. The Venom breakout is the primary breakout used to connect payloads to the primary flight stack, as well as connect the primary flight stack to auxiliary flight stacks.<br /> | The Venom Breakout is the HONEY-standard 50-pin 1.27mm pitch connector/cabling that provides primary data & power connections over cabling between HONEY stacks. The Venom breakout is the primary breakout used to connect payloads to the primary flight stack, as well as connect the primary flight stack to auxiliary flight stacks.<br /> | ||
| − | Connector: SHF-125-01-L-D-RA<br /> | + | Connector: [http://suddendocs.samtec.com/catalog_english/shf.pdf SHF-125-01-L-D-RA]<br /> |
| − | Cabling: FFSD-25-D-XX.XX-01-N<br /> | + | Cabling: [http://suddendocs.samtec.com/catalog_english/ffsd.pdf FFSD-25-D-XX.XX-01-N]<br /> |
where XX.XX is the length of the desired cable, in inches.<br /> | where XX.XX is the length of the desired cable, in inches.<br /> | ||
| − | ==Fang Breakout== | + | ===Fang Breakout=== |
The Fang breakout is a slightly larger, 56-pin, 2.54mm pitch connector currently not heavily used, but also breaks out the 2nd CAN bus and left-over avionics pins.<br /> | The Fang breakout is a slightly larger, 56-pin, 2.54mm pitch connector currently not heavily used, but also breaks out the 2nd CAN bus and left-over avionics pins.<br /> | ||
| − | Connector: TST-156-01-F-D-RA<br /> | + | Connector: [http://suddendocs.samtec.com/catalog_english/tst_th.pdf TST-156-01-F-D-RA]<br /> |
| − | Cabling: HCSD-28-D-XX.XX-01-S-N<br /> | + | Cabling: [http://suddendocs.samtec.com/catalog_english/hcsd.pdf HCSD-28-D-XX.XX-01-S-N]<br /> |
where XX.XX is the length of the desired cable, in inches.<br /> | where XX.XX is the length of the desired cable, in inches.<br /> | ||
| Line 64: | Line 69: | ||
===Viper=== | ===Viper=== | ||
| − | Venom Breakout Connector (2) -- SHF-125-01-L-D-RA<br /> | + | Venom Breakout Connector (2) -- [http://suddendocs.samtec.com/catalog_english/shf.pdf SHF-125-01-L-D-RA]<br /> |
| − | Fang Breakout Connector (1) -- TST-156-01-F-D-RA<br /> | + | Fang Breakout Connector (1) -- [http://suddendocs.samtec.com/catalog_english/tst_th.pdf TST-156-01-F-D-RA]<br /> |
===Cobra=== | ===Cobra=== | ||
| − | Stack Right Angle Pinout (1) -- TLW-114-01-G-D-RA<br /> | + | Stack Right Angle Pinout (1) -- [http://suddendocs.samtec.com/catalog_english/tlw_th.pdf TLW-114-01-G-D-RA]<br /> |
| − | Teensy Right Angle Pinout (1) -- TLW-120-01-G-D-RA<br /> | + | Teensy Right Angle Pinout (1) -- [http://suddendocs.samtec.com/catalog_english/tlw_th.pdf TLW-120-01-G-D-RA]<br /> |
| − | ProtoBoard Sockets (4) -- SS-102-G-2<br /> | + | ProtoBoard Sockets (4) -- [http://suddendocs.samtec.com/catalog_english/ss.pdf SS-102-G-2]<br /> |
| − | ProtoBoard Pins (4) -- BBS-102-G-A<br /> | + | ProtoBoard Pins (4) -- [http://suddendocs.samtec.com/catalog_english/bbs.pdf BBS-102-G-A]<br /> |
| − | 2X4 Power Select Headers (2) -- TSW-104-07-G-D<br /> | + | 2X4 Power Select Headers (2) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-104-07-G-D]<br /> |
| − | Power Shunts (2) -- SNT-100-BK-T<br /> | + | Power Shunts (2) -- [http://suddendocs.samtec.com/catalog_english/snt.pdf SNT-100-BK-T]<br /> |
Teensy 3.2 Socket (1) -- see general section above. | Teensy 3.2 Socket (1) -- see general section above. | ||
===ProtoBee=== | ===ProtoBee=== | ||
| − | Venom Breakout (2) -- SHF-125-01-L-D-RA<br /> | + | Venom Breakout (2) -- [http://suddendocs.samtec.com/catalog_english/shf.pdf SHF-125-01-L-D-RA]<br /> |
| − | Stack Socket (1) -- SSW-119-01-G-D<br /> | + | Stack Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-119-01-G-D]<br /> |
| − | Teensy Pinout Socket (1) -- SSW-119-01-G-D<br /> | + | Teensy Pinout Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-119-01-G-D]<br /> |
| − | Power Bus Socket (1) -- SSW-105-01-G-D<br /> | + | Power Bus Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-105-01-G-D]<br /> |
| − | Shunts (3) -- SNT-100-BK-T<br /> | + | Shunts (3) -- [http://suddendocs.samtec.com/catalog_english/snt.pdf SNT-100-BK-T]<br /> |
| − | Power Rail Selector Headers -- TSW-106-07-G-S<br /> | + | Power Rail Selector Headers -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-106-07-G-S]<br /> |
| − | CAN Terminator Headers -- TSW-102-07-G-S<br /> | + | CAN Terminator Headers -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-102-07-G-S]<br /> |
Teensy 3.2 Socket (1) -- see general section above. | Teensy 3.2 Socket (1) -- see general section above. | ||
===QueenBee=== | ===QueenBee=== | ||
| − | Teensy Pinout Socket (1) -- SSW-125-01-G-D<br /> | + | Teensy Pinout Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-125-01-G-D]<br /> |
| − | DataBus Socket (1) -- SSW-130-01-G-D<br /> | + | DataBus Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-130-01-G-D]<br /> |
| − | PowerBus Socket (1) -- SSW-112-01-G-D<br /> | + | PowerBus Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-112-01-G-D]<br /> |
| − | Debug Socket (1) -- SSW-112-01-G-D<br /> | + | Debug Socket (1) -- [http://suddendocs.samtec.com/catalog_english/ssw_th.pdf SSW-112-01-G-D]<br /> |
| − | Venom Breakout (1) -- SHF-125-01-L-D-RA<br /> | + | Venom Breakout (1) -- [http://suddendocs.samtec.com/catalog_english/shf.pdf SHF-125-01-L-D-RA]<br /> |
| − | Auxiliary Breakout (3) -- TST-104-04-G-D-LA<br /> | + | Auxiliary Breakout (3) -- [http://suddendocs.samtec.com/catalog_english/tst_th.pdf TST-104-04-G-D-LA]<br /> |
| − | CAN1 Terminating Headers (1) -- TSW-102-07-G-D<br /> | + | CAN1 Terminating Headers (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-102-07-G-D]<br /> |
| − | CAN1/2 Terminating Headers (1) -- TSW-104-07-G-D<br /> | + | CAN1/2 Terminating Headers (1) -- [http://suddendocs.samtec.com/catalog_english/tsw_th.pdf TSW-104-07-G-D]<br /> |
| − | Shunts (3) -- SNT-100-BK-T<br /> | + | Shunts (3) -- [http://suddendocs.samtec.com/catalog_english/snt.pdf SNT-100-BK-T]<br /> |
Teensy 3.2 Socket (1) -- see general section above.<br /> | Teensy 3.2 Socket (1) -- see general section above.<br /> | ||
Teensy 3.6 Socket (1) -- see general section above. | Teensy 3.6 Socket (1) -- see general section above. | ||
| + | |||
| + | [[Category: High Altitude Balloons]][[Category: HABEES]][[Category: HONEY]] | ||
Latest revision as of 23:40, 15 August 2017
| HONEY Standards | |
|---|---|
| Part of the HONEY Architecture series & the HABEES series | |
| |
| General | |
| HONEY Standards • Venom Breakout • Fang Breakout • Board Naming | |
| Core Software | |
| STINGR | |
| Core Avionics | |
| The Count | |
| Core Power | |
| Biscuit | |
| Core Peripherals | |
| Cobra • Viper • ProtoBee | |
| Core Radio | |
| Macaw | |
| Test & Prototype | |
| QueenBee | |
| Guides | |
| Making a HONEY Board • Using STINGR • Using QueenBee • Making a Prototype | |
| V • E |
This page lists all of the connectors used on various boards, as well as standardized HONEY connectors and their use cases. HONEY uses primarily (and almost exclusively) Samtec connectors -- and only uses other connectors when no available Samtec connector fills the use case.
General Layouts
The following section indicate connectors used for general things -- like sockets for teensies, the actual HONEY flight stack, and HONEY standardized breakouts.
Teensy 3.2 Socket + Mating Pins
The below are used for all HONEY Teensy 3.2 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into four portions -- the internal 2x7 row of pins that are SMD on the bottom of the teensy (herein referred to as "internal row"), the two 14-pin side rows, the back 5-pin row, and the remaining 3 side pins (A10/A11/AREF). The below is broken into the socket connectors, and the male teensy-side connectors.
Sockets (PCB Side)
Internal Row (1) -- SLW-107-01-G-D
Side Rows (2) -- SLW-114-01-G-S
Back Row (1) -- SLW-105-01-G-S
A10/A11/AREF Row (1) -- SLW-103-01-G-S
Headers (Teensy Side)
Internal Row (1) -- TSM-107-04-T-DV
Side Rows (2) -- TSW-114-06-G-S
Back Row (1) -- TSW-105-06-G-S
A10/A11/AREF Row (1) -- TSW-103-06-G-S
Teensy 3.6 Socket + Mating Pins
The below are used for all HONEY Teensy 3.6 sockets -- this includes the socket itself, on the PCB side, and the male pins that are soldered to the teensy for mating with the socket. This is broken into five portions -- three sets of internal rows, that are SMD on the bottom of the Teensy; the furthest back one is referred to as Internal Row 1, the middle one is Internal Row 2, and the furthest up is Internal Row 3. Additionally, there are the two side rows, and the remaining A10/A11/AREF row. The below is broken into the socket connectors, and the male teensy-side connectors.
Sockets (PCB Side)
Internal Row 1 (1) -- SLW-105-01-G-D
Internal Row 2 (2) -- SLW-103-01-G-D
Internal Row 3 (1) -- SLW-104-01-G-D
Side Rows (2) -- SLW-124-01-G-S
A10/A11/AREF Row (1) -- SLW-103-01-G-S
Headers (Teensy Side)
Internal Row 1 (1) -- TSM-105-04-T-DV
Internal Row 2 (2) -- TSM-103-04-T-DV
Internal Row 3 (1) -- TSM-104-04-T-DV
Side Rows (2) -- TSW-124-06-G-S
A10/A11/AREF Row (1) -- TSW-103-06-G-S
HONEY Stack Connectors
Databus (stackthrough) (1) -- PTHF-130-02-G-Q-368
Databus (non-stackthrough (?) -- PTHF-130-03-G-Q-368
Powerbus (stackthrough) (1) -- ESQ-105-39-G-D-LL
CANbus (stackthrough) (1) -- ESQ-103-39-G-D-LL
Terminator Holder (1) -- TSW-104-07-G-D
Shunt (2) -- SNT-100-BK-T
HONEY Breakouts
Venom Breakout
The Venom Breakout is the HONEY-standard 50-pin 1.27mm pitch connector/cabling that provides primary data & power connections over cabling between HONEY stacks. The Venom breakout is the primary breakout used to connect payloads to the primary flight stack, as well as connect the primary flight stack to auxiliary flight stacks.
Connector: SHF-125-01-L-D-RA
Cabling: FFSD-25-D-XX.XX-01-N
where XX.XX is the length of the desired cable, in inches.
Fang Breakout
The Fang breakout is a slightly larger, 56-pin, 2.54mm pitch connector currently not heavily used, but also breaks out the 2nd CAN bus and left-over avionics pins.
Connector: TST-156-01-F-D-RA
Cabling: HCSD-28-D-XX.XX-01-S-N
where XX.XX is the length of the desired cable, in inches.
Board Connectors
The below section lists the connectors for various boards, so that they may be purchased if needed to populate a new board, or replace the connector on an old board -- or for the sake of reuse on a new board.
Viper
Venom Breakout Connector (2) -- SHF-125-01-L-D-RA
Fang Breakout Connector (1) -- TST-156-01-F-D-RA
Cobra
Stack Right Angle Pinout (1) -- TLW-114-01-G-D-RA
Teensy Right Angle Pinout (1) -- TLW-120-01-G-D-RA
ProtoBoard Sockets (4) -- SS-102-G-2
ProtoBoard Pins (4) -- BBS-102-G-A
2X4 Power Select Headers (2) -- TSW-104-07-G-D
Power Shunts (2) -- SNT-100-BK-T
Teensy 3.2 Socket (1) -- see general section above.
ProtoBee
Venom Breakout (2) -- SHF-125-01-L-D-RA
Stack Socket (1) -- SSW-119-01-G-D
Teensy Pinout Socket (1) -- SSW-119-01-G-D
Power Bus Socket (1) -- SSW-105-01-G-D
Shunts (3) -- SNT-100-BK-T
Power Rail Selector Headers -- TSW-106-07-G-S
CAN Terminator Headers -- TSW-102-07-G-S
Teensy 3.2 Socket (1) -- see general section above.
QueenBee
Teensy Pinout Socket (1) -- SSW-125-01-G-D
DataBus Socket (1) -- SSW-130-01-G-D
PowerBus Socket (1) -- SSW-112-01-G-D
Debug Socket (1) -- SSW-112-01-G-D
Venom Breakout (1) -- SHF-125-01-L-D-RA
Auxiliary Breakout (3) -- TST-104-04-G-D-LA
CAN1 Terminating Headers (1) -- TSW-102-07-G-D
CAN1/2 Terminating Headers (1) -- TSW-104-07-G-D
Shunts (3) -- SNT-100-BK-T
Teensy 3.2 Socket (1) -- see general section above.
Teensy 3.6 Socket (1) -- see general section above.