Changes

143 bytes added ,  06:43, 12 November 2017
m
no edit summary
Line 12: Line 12:  
[https://www.google.com/maps/place/Durand+Building,+496+Lomita+Mall,+Stanford,+CA+94305/@37.4268696,-122.1754608,17z/data=!3m1!4b1!4m5!3m4!1s0x808fbb2aa1a2e6c7:0x150c778bd3b558cf!8m2!3d37.4268696!4d-122.1732721 (address)] in room 150. This is the lab directly to the right of the first floor entrance. The spin coater is a model PWM32-PS-CB15 Spinner System developed by Headway Research, Inc.
 
[https://www.google.com/maps/place/Durand+Building,+496+Lomita+Mall,+Stanford,+CA+94305/@37.4268696,-122.1754608,17z/data=!3m1!4b1!4m5!3m4!1s0x808fbb2aa1a2e6c7:0x150c778bd3b558cf!8m2!3d37.4268696!4d-122.1732721 (address)] in room 150. This is the lab directly to the right of the first floor entrance. The spin coater is a model PWM32-PS-CB15 Spinner System developed by Headway Research, Inc.
   −
Make sure you're wearing safety glasses when using the spinner! Glasses are on the wall to the right when you enter the room. Bring a micropipette and a small, lightweight piece of glass/plastic to spin on. The spinner uses a vacuum to keep the slide on the rotating bit, so no special attachment is necessary. But, if your slide that you're loading your
+
Make sure you're wearing safety glasses when using the spinner! Glasses are on the wall to the right when you enter the room. Bring a micropipette and a small, lightweight piece of glass/plastic to spin on. The spinner uses a vacuum to keep the slide on the rotating bit, so no special attachment is necessary. But, if your slide that you're loading is too heavy, it won't work. Use light pieces of glass/plastic!
 +
 
 +
Loading a spin pattern on the PWM32 means making a recipe. A recipe has 1 to 9 steps, each one with its own RPM and duration. For basic use, we only need to change 1 step for our desired speed and duration.
    
==Standard Operating Procedure==
 
==Standard Operating Procedure==
Line 19: Line 21:  
2. Turn on the yellow and black box.  
 
2. Turn on the yellow and black box.  
   −
3. For basic spin coating:
+
3. For basic spin coating,
 
   a. Press Recipe
 
   a. Press Recipe
   b. Press 3: This is the recipe that we'll be using for SSI. A recipe has from 1 to 9 steps, each with a different length and RPM. For basic use, only change the first step of recipe 3.
+
   b. Press 3: This is the recipe that we'll be using for SSI.  
   c. Press Step, then 1 on the keypad (to change the first step)
+
   c. Press Step, then 1 on the keypad (to change the first step).
 
   d. Press Step terminate and set the duration with the number pad. Then press enter.
 
   d. Press Step terminate and set the duration with the number pad. Then press enter.
 
   e. Press Speed and set RPMs with the number pad. Then press enter.
 
   e. Press Speed and set RPMs with the number pad. Then press enter.
39

edits