User contributions
12 August 2018
Template:Balloon-sidebar
no edit summary
+4
Template:Balloon-sidebar
no edit summary
+84
HONEY
Redirected page to Gen 2 Architecture Rev1
+5
Gen 2 Architecture Rev1
no edit summary
-2,643
Gen 2 Architecture Rev1
Created page with "{{HONEY-sidebar | header = HONEY Architecture | img link = File:HONEY2_rev1.jpg | designer = Vinh Nguyen | techline = Balloons Core Architecture | version = Generation II | na..."
15 July 2018
Balloons Gen 5 Avionics
no edit summary
+826
Balloons Gen 3 BMS
no edit summary
Balloons Gen 3 BMS
no edit summary
+442
File:G3 usbcharger.PNG
no edit summary
File:G3 top.PNG
no edit summary
File:G3 tmon.PNG
no edit summary
File:G3 protector.PNG
no edit summary
File:G3 output connectors.PNG
no edit summary
File:G3 ldo.PNG
no edit summary
File:G3 boost.PNG
no edit summary
File:G3 batteries.PNG
no edit summary
File:G5 top.PNG
no edit summary
File:G5 thermocouple.PNG
no edit summary
File:G5 teensycore.PNG
no edit summary
File:G5 stackbus.PNG
no edit summary
File:G5 rb connector.PNG
no edit summary
File:G5 pressure sensors.PNG
no edit summary
File:G5 multiplexer.PNG
no edit summary
File:G5 micro sd.PNG
no edit summary
File:Leds.PNG
no edit summary
File:Gps.PNG
no edit summary
File:GFSK.PNG
no edit summary
File:Cutdown.PNG
Used to sever the payload from the balloon in a controlled manner. Use cases include cutting down at a particular altitude, or to limit how far the balloon travels.
File:Can.PNG
Used for high-speed communication between boards on the stack.
File:Bypasscaps.PNG
Capacitors charged directly by the batteries used to deliver the initial burst of current to parts of the system faster than the batteries can, due to their closer proximity to loads than the batteries.
Balloons Gen 5 Avionics
no edit summary
m-1
Balloons Gen 5 Avionics
no edit summary
m+1
Balloons Gen 3 BMS
no edit summary
+137
Balloons Gen 5 Avionics
no edit summary
+95
Balloons Gen 3 BMS
no edit summary
+242
Balloons Gen 3 BMS
Created page with "'''Cupcake''' is the 3rd iteration of the '''B'''attery '''M'''anagement '''S'''system for the HABEES Standard Avionics Platform. It addresses the complexity issue of the prev..."
File:Gen5bms s.PNG
Cupcake PCB layout
Balloons Gen 5 Avionics
Created page with "{{HONEY-sidebar | header = Kermit | img link = File:Gen5s.PNG | designer = Vinh Nguyen | techline = Balloons Core Avionics | version = Generation V | name = Kermit }} '''Kermi..."
File:Gen5s.PNG
PCB Layout of Gen5 Avionics.
7 July 2018
22 June 2017
Balloons Gen 1 Radio
Created page with "'''Macaw''' is the first generation of a VHF/UHF transmit/receive board for Balloons Core Avionics. The purpose of the radio board is to provide an alternate means of transmit..."
File:Macaw.jpg
Assembled radio board
File:HAB Macaw PCB.PNG
PCB Layout for Macaw.
File:HAB Macaw VHFTX.PNG
Schematic showing the connections to the third Dorji radio.
File:HAB Macaw VHFRX.PNG
Schematic of the connections to the second Dorji radio.
File:HAB Macaw TopSheet.PNG
Main schematic of Macaw.
File:HAB Macaw Stackbus.PNG
Avionics Stackbus connections for Macaw
File:HAB Macaw APRS.PNG
Schematic of the APRS Radio on Macaw.
Template:Balloon-sidebar
no edit summary
+1
Template:Balloon-sidebar
no edit summary
+39