Difference between revisions of "SSI-28"

From Stanford SSI Wiki
Jump to navigation Jump to search
Line 30: Line 30:
 
[[File:SSI_28_01.png | right| thumb| <center> Ground track </center>]]
 
[[File:SSI_28_01.png | right| thumb| <center> Ground track </center>]]
 
SSI-28 was outfitted with a balloon with about .5 net Kg of lift.  
 
SSI-28 was outfitted with a balloon with about .5 net Kg of lift.  
Because of high winds, the balloon drifted farther than expected traveling 169.8 kilometers away.  
+
Because of high winds, the balloon drifted farther than expected, traveling 169.8 kilometers away.  
  
 
== Debriefing ==
 
== Debriefing ==

Revision as of 02:54, 1 February 2016

SSI-28
250px
Launch date January 30, 2016, 10:42:58
Launch site 2093 San Juan Drive, Hollister, CA
Launch coordinates 36.84857,-121.43262
Flight duration 2:35:19
Landing coordinates 36.51287,-119.57532
←SSI-27 SSI Balloon Launches SSI-29→


SSI-28 was the 28th launch of the SSI Balloons team and the first launch for the experimental payloads of Project_UV and Project_X. It flew 169.8 kilometers over a course of 2.5 hours, reaching an altitude of 24 Kilometers before landing. It was a complete success, querying ultraviolet A and ultraviolet B concentrations in correlation with altitude, and the concentrations of specific gasses at different altitudes, in addition to powering heaters and capturing visuals with a camera.

Pre-Launch

The team

SSI-28 was part of a combined experimental balloon launch with Project_UV and Project_X designed to provide preliminary data for these research projects.

Payload Specifications

The Teensy electronics

This payload utilized a Teensy3.2 instead of an Arduino, allowing for better computational power, more memory, and more sensor readings at a higher resolution. The teensy measured time, altitude, UV(A) & UV(B) in watts/cm^2, and gas concentrations of Hydrogen, Methane, Carbon Dioxide, Carbon Monoxide, Ozone, and particulate matter. It was also capable of self regulating its temperature, and writing data to an SD card.

Launch site

The launch site

SSI-28 was launched from a park near 2093 San Juan Drive, Hollister, CA at 10:42AM. The team left campus at 5:30AM, had no issues on site, and returned to campus at 9:00PM.

The Flight

24Km view
Ground track

SSI-28 was outfitted with a balloon with about .5 net Kg of lift. Because of high winds, the balloon drifted farther than expected, traveling 169.8 kilometers away.

Debriefing

SSI-28 was a success and fulfilled all of the initial goals set out by the team.

  • Successful data collection and logging of Project_UV data
  • Successful data collection and logging of Project_X data
  • Successful implementation of a heater control mechanism
  • Successful landing and recovery

Gallery

Balloon Launches
2014-15 SSI-19202122
2015-16 SSI-23(a) • 2425262728293031323334353637383940414243
2016-17 444546474849505152
2017-18
2018-19 8386879091
2019-20 929397
VE